Craig & Derricott GWN Rope Pull Switch 214.5 mm, Straight, 2 NO/2 NC
- RS庫存編號:
- 198-7380
- 製造零件編號:
- GWN2
- 製造商:
- Craig & Derricott
小計（1 件）*
TWD14,598.00
(不含稅)
TWD15,327.90
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 4 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD14,598.00 |
* 參考價格
- RS庫存編號:
- 198-7380
- 製造零件編號:
- GWN2
- 製造商:
- Craig & Derricott
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Craig & Derricott | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| Indicator Type | Rope Tension | |
| Mounting Orientation | Straight | |
| IP Rating | IP65 | |
| Number of Cable Entries | 3 | |
| Series | GWN | |
| Contact AC Voltage | 415V ac | |
| Reset Button | Yes | |
| E-Stop Button | Yes | |
| Contact Current | 10A | |
| Contact DC Voltage | 24V dc | |
| Width | 100mm | |
| Standards/Approvals | EN, ISO | |
| Depth | 99.5mm | |
| Length | 214.5mm | |
| Housing Material | Die Cast Aluminium | |
| Hazardous Area Certification | No | |
| Mechanical Life | 1000000Operations | |
| Conduit Entry | M20 | |
| 選取全部 | ||
|---|---|---|
品牌 Craig & Derricott | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
Indicator Type Rope Tension | ||
Mounting Orientation Straight | ||
IP Rating IP65 | ||
Number of Cable Entries 3 | ||
Series GWN | ||
Contact AC Voltage 415V ac | ||
Reset Button Yes | ||
E-Stop Button Yes | ||
Contact Current 10A | ||
Contact DC Voltage 24V dc | ||
Width 100mm | ||
Standards/Approvals EN, ISO | ||
Depth 99.5mm | ||
Length 214.5mm | ||
Housing Material Die Cast Aluminium | ||
Hazardous Area Certification No | ||
Mechanical Life 1000000Operations | ||
Conduit Entry M20 | ||
- COO (Country of Origin):
- GB
GWN Series, Grab Wire
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304
Note
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757
Stock No typ 239-6757
相關連結
- Craig & Derricott GWN Rope Pull Switch 209 mm 2 NO/2 NC
- Craig & Derricott GWN Rope Pull Switch 184 mm 1 NO/2 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC
- Craig & Derricott EDFG Hinge Switch 1 NO/1 NC
- Craig & Derricott ECODG Hinge Switch 1 NO/1 NC
- Pilz 570301 Rope Pull Switch 50 m, 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Pilz 570 Rope Pull Switch 50 m, 2 NO/2 NC