Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC

查看所有Rope Pull Switches

小計（1 件）*

TWD17,379.00

(不含稅)

TWD18,247.95

(含稅)

Add to Basket
選擇或輸入數量
製造商存貨
  • 準備從 2026年6月09日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD17,379.00

* 參考價格

RS庫存編號:
814-8129
製造零件編號:
XY2CE2A296H7
製造商:
Telemecanique Sensors
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Telemecanique Sensors

Product Type

Rope Pull Switch

Contact Configuration

2 NO/2 NC

IP Rating

IP66

Number of Cable Entries

1

Series

XY2-CE

Contact Current

10A

Minimum Operating Temperature

-25°C

Contact AC Voltage

130V ac

Reset Button

Yes

Maximum Operating Temperature

70°C

不相容

COO (Country of Origin):
MA

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches


These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action

The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling

Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch

Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)

The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

相關連結