Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in, Right Side, 1 NO/1 NC
- RS庫存編號:
- 814-8100
- 製造零件編號:
- XY2CE1A150H7
- 製造商:
- Telemecanique Sensors
小計（1 件）*
TWD15,903.00
(不含稅)
TWD16,698.15
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2 件從 2026年4月27日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD15,903.00 |
* 參考價格
- RS庫存編號:
- 814-8100
- 製造零件編號:
- XY2CE1A150H7
- 製造商:
- Telemecanique Sensors
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 1 NO/1 NC | |
| Mounting Orientation | Right Side | |
| IP Rating | IP66 | |
| Number of Cable Entries | 1 | |
| Series | XY2-CE | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 7.8in | |
| Depth | 4.1in | |
| Length | 5.6in | |
| Housing Material | Stainless Steel | |
| Conduit Entry | 1/2 in NPT | |
| Mechanical Life | 60000Cycles | |
| 選取全部 | ||
|---|---|---|
品牌 Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 1 NO/1 NC | ||
Mounting Orientation Right Side | ||
IP Rating IP66 | ||
Number of Cable Entries 1 | ||
Series XY2-CE | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Width 7.8in | ||
Depth 4.1in | ||
Length 5.6in | ||
Housing Material Stainless Steel | ||
Conduit Entry 1/2 in NPT | ||
Mechanical Life 60000Cycles | ||
豁免
- COO (Country of Origin):
- MA
Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
Note
The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.
Standards
EN/ISO 13850:2006
相關連結
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 1 NO/1 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm 1 NO/1 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 2 NO/2 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 1 NO/1 NC