Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm, Left Side, 1 NO/1 NC
- RS庫存編號:
- 610-0257
- Distrelec 貨號:
- 304-23-867
- 製造零件編號:
- XY2CE2A250
- 製造商:
- Telemecanique Sensors
小計（1 件）*
TWD14,515.00
(不含稅)
TWD15,240.75
(含稅)
訂單超過 $1,300.00 免費送貨
有限的庫存
- 12 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD14,515.00 |
* 參考價格
- RS庫存編號:
- 610-0257
- Distrelec 貨號:
- 304-23-867
- 製造零件編號:
- XY2CE2A250
- 製造商:
- Telemecanique Sensors
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 1 NO/1 NC | |
| Mounting Orientation | Left Side | |
| IP Rating | IP65 | |
| Number of Cable Entries | 3 | |
| Series | XY2-CE | |
| Contact Current | 3A | |
| Contact DC Voltage | 250V dc | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| E-Stop Button | Yes | |
| Contact AC Voltage | 240V ac | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Depth | 105mm | |
| Length | 142mm | |
| Housing Material | Zamak (Body), Stainless Steel (Cover) | |
| Width | 229mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | PG13.5 | |
| Mechanical Life | 10Cycles | |
| 選取全部 | ||
|---|---|---|
品牌 Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 1 NO/1 NC | ||
Mounting Orientation Left Side | ||
IP Rating IP65 | ||
Number of Cable Entries 3 | ||
Series XY2-CE | ||
Contact Current 3A | ||
Contact DC Voltage 250V dc | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
E-Stop Button Yes | ||
Contact AC Voltage 240V ac | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
Depth 105mm | ||
Length 142mm | ||
Housing Material Zamak (Body), Stainless Steel (Cover) | ||
Width 229mm | ||
Hazardous Area Certification No | ||
Conduit Entry PG13.5 | ||
Mechanical Life 10Cycles | ||
Telemecanique Sensors Emergency Stop Rope Pull Switch
The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NO/1NC contact configuration. It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC and the current rating of the switch is 3A and 270mA for AC and DC respectively. It is designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. This product is easy to install and offers a quick visual check of the switch status for machine restart. This switch has a rope span of 50m and the mounting orientation is to the left side.
Note:
Manufacturer part numbers with the suffix H29 are the ISO M20 threaded cable entry version.
Features and Benefits
Switches incorporate positive opening operation contacts with the tripping of the switch being made with positive action
Switch latches in the tripped position (N/C safety contact(s) open)
Function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 50m
Comes with a pilot light (direct supply)
Size of cable entry is PG13.5
Certifications
EN/ISO 13850:2006
IP65 rated
相關連結
- Telemecanique Sensors XY2-CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 1 NO/1 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 1 NO/1 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch 5.6 in 2 NO/2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Telemecanique Sensors XY2 Rope Pull Switch