ZANDER AACHEN ZLMS Grab Wire Switch 50 mm, Screw, 1 NO, 3 NC
- RS庫存編號:
- 475-683
- 製造零件編號:
- 940050
- 製造商:
- ZANDER AACHEN
小計（1 件）*
TWD25,970.00
(不含稅)
TWD27,268.50
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月12日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD25,970.00 |
* 參考價格
- RS庫存編號:
- 475-683
- 製造零件編號:
- 940050
- 製造商:
- ZANDER AACHEN
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ZANDER AACHEN | |
| Product Type | Grab Wire Switch | |
| Indicator Type | LED | |
| Mounting Orientation | Screw | |
| Contact Configuration | 1 NO, 3 NC | |
| IP Rating | IP69K, IP67 | |
| Number of Cable Entries | 3 | |
| Series | ZLMS | |
| Reset Button | Yes | |
| E-Stop Button | Yes | |
| Contact AC Voltage | 240V ac | |
| Contact DC Voltage | 24V dc | |
| Minimum Operating Temperature | -25°C | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 80°C | |
| Length | 50mm | |
| Depth | 57mm | |
| Housing Material | Stainless Steel | |
| Width | 74mm | |
| Standards/Approvals | ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | |
| Hazardous Area Certification | No | |
| Conduit Entry | 3 x M20 | |
| Mechanical Life | 1.5Operations | |
| 選取全部 | ||
|---|---|---|
品牌 ZANDER AACHEN | ||
Product Type Grab Wire Switch | ||
Indicator Type LED | ||
Mounting Orientation Screw | ||
Contact Configuration 1 NO, 3 NC | ||
IP Rating IP69K, IP67 | ||
Number of Cable Entries 3 | ||
Series ZLMS | ||
Reset Button Yes | ||
E-Stop Button Yes | ||
Contact AC Voltage 240V ac | ||
Contact DC Voltage 24V dc | ||
Minimum Operating Temperature -25°C | ||
Contact Current 3A | ||
Maximum Operating Temperature 80°C | ||
Length 50mm | ||
Depth 57mm | ||
Housing Material Stainless Steel | ||
Width 74mm | ||
Standards/Approvals ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | ||
Hazardous Area Certification No | ||
Conduit Entry 3 x M20 | ||
Mechanical Life 1.5Operations | ||
- COO (Country of Origin):
- DE
The H.ZANDER Safety rope switches are designed to be mounted on machines and sections of conveyors, which cannot be protected by guards. Safety rope switches can initiate the emergency command from any point along the installed rope length. A red LED, which is visible from far off, indicates the switching status. The safety rope switch is also available with stainless steel housing.
Switches off by breakage or tension loss
Protect hazards up to 50 m
Rope tension indicator
Stainless steel housing IP69K
相關連結
- ZANDER AACHEN ZLSE Rope Pull Switch 239 mm 3 NC/1 NO
- Telemecanique Sensors XY2CH Grab Wire Switch 19.5 cm 1 NO/1 NC
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- ABB LineStrong3DZ Grab Wire Switch 250 m, 4 NO/4 NC
- ABB LineStrong3D Grab Wire Switch 250 m, 4 NO/4 NC
- ABB LineStrong3LZ Grab Wire Switch 125 m 2 NO/4 NC
- ABB LineStrong3L Grab Wire Switch 125 m 2 NO/4 NC
- ABB LineStrong3RZ Grab Wire Switch 125 m 2 NO/4 NC