Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS庫存編號:
- 130-0877
- 製造零件編號:
- XY2CEDA290
- 製造商:
- Telemecanique Sensors
小計（1 件）*
TWD13,736.00
(不含稅)
TWD14,422.80
(含稅)
訂單超過 $1,300.00 免費送貨
有限的庫存
- 加上 6 件從 2026年4月27日 起發貨
- 加上 4 件從 2026年5月21日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD13,736.00 |
* 參考價格
- RS庫存編號:
- 130-0877
- 製造零件編號:
- XY2CEDA290
- 製造商:
- Telemecanique Sensors
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Contact AC Voltage | 240V ac | |
| Contact DC Voltage | 250V dc | |
| Contact Current | 3A | |
| E-Stop Button | Yes | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | EN/IEC 60947-5-5, CCC, UL 508, CSA, CSA C 22-2, UL (NISD), EAC | |
| Width | 106mm | |
| Housing Material | Stainless Steel | |
| Length | 285mm | |
| Depth | 142mm | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | M20 | |
| 選取全部 | ||
|---|---|---|
品牌 Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Contact AC Voltage 240V ac | ||
Contact DC Voltage 250V dc | ||
Contact Current 3A | ||
E-Stop Button Yes | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals EN/IEC 60947-5-5, CCC, UL 508, CSA, CSA C 22-2, UL (NISD), EAC | ||
Width 106mm | ||
Housing Material Stainless Steel | ||
Length 285mm | ||
Depth 142mm | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry M20 | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
相關連結
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm, Right Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- Telemecanique Sensors XY2CH Rope Pull Switch 201 mm, 1 NO/1 NC