Telemecanique Sensors XY2CE Rope Pull Switch, 2 x 35 → 2 x 100m, 2NO/2NC
- RS庫存編號:
- 130-0874
- 製造零件編號:
- XY2CEDA190
- 製造商:
- Telemecanique Sensors
小計（1 件）*
TWD14,739.00
(不含稅)
TWD15,475.95
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年1月28日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD14,739.00 |
* 參考價格
- RS庫存編號:
- 130-0874
- 製造零件編號:
- XY2CEDA190
- 製造商:
- Telemecanique Sensors
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Telemecanique Sensors | |
| Normal State Configuration | 2NO/2NC | |
| Cable Length | 2 x 35 → 2 x 100m | |
| IP Rating | IP66 | |
| Number of Poles | DPST | |
| Series | XY2CE | |
| Range | Preventa XY2 | |
| Length | 285mm | |
| Width | 106mm | |
| Depth | 142mm | |
| Housing Material | Stainless Steel | |
| Hazardous Area Certification | ATEX | |
| Maximum Operating Temperature | +70°C | |
| Maximum AC Voltage | 240V | |
| Conduit Entry | M20 | |
| Standards Met | CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508 | |
| Minimum Operating Temperature | -25°C | |
| Dimensions | 285 x 106 x 142mm | |
| Maximum DC Voltage | 250V | |
| 選取全部 | ||
|---|---|---|
品牌 Telemecanique Sensors | ||
Normal State Configuration 2NO/2NC | ||
Cable Length 2 x 35 → 2 x 100m | ||
IP Rating IP66 | ||
Number of Poles DPST | ||
Series XY2CE | ||
Range Preventa XY2 | ||
Length 285mm | ||
Width 106mm | ||
Depth 142mm | ||
Housing Material Stainless Steel | ||
Hazardous Area Certification ATEX | ||
Maximum Operating Temperature +70°C | ||
Maximum AC Voltage 240V | ||
Conduit Entry M20 | ||
Standards Met CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508 | ||
Minimum Operating Temperature -25°C | ||
Dimensions 285 x 106 x 142mm | ||
Maximum DC Voltage 250V | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m