Vishay SI1427EDH Type P-Channel MOSFET, -2 A, -20 V, 6-Pin SC-70 SI1427EDH-T1-GE3

RS庫存編號:: 256-7340
製造零件編號:: SI1427EDH-T1-GE3
製造商:: Vishay

Vishay SI1427EDH Type P-Channel MOSFET, -2 A, -20 V, 6-Pin SC-70 SI1427EDH-T1-GE3

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 卷，共 3000 件）*

TWD21,000.00

(不含稅)

TWD22,050.00

訂單超過 $1,300.00 免費送貨

暫時缺貨

從 2027年5月10日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每卷*
3000 +	TWD7.00	TWD21,000.00

* 參考價格

RS庫存編號:: 256-7340
製造零件編號:: SI1427EDH-T1-GE3
製造商:: Vishay

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Vishay
	Product Type	MOSFET
	Channel Type	Type P
	Maximum Continuous Drain Current Id	-2A
	Maximum Drain Source Voltage Vds	-20V
	Package Type	SC-70
	Series	SI1427EDH
	Mount Type	Surface
	Pin Count	6
	Maximum Drain Source Resistance Rds	0.165Ω
	Typical Gate Charge Qg @ Vgs	7.6nC
	Minimum Operating Temperature	-55°C
	Maximum Power Dissipation Pd	2.8W
	Forward Voltage Vf	-1.2V
	Maximum Gate Source Voltage Vgs	8V
	Maximum Operating Temperature	150°C
	Standards/Approvals	RoHS
	Height	1.1mm
	Automotive Standard	No

	選取全部
	品牌 Vishay
	Product Type MOSFET
	Channel Type Type P
	Maximum Continuous Drain Current Id -2A
	Maximum Drain Source Voltage Vds -20V
	Package Type SC-70
	Series SI1427EDH
	Mount Type Surface
	Pin Count 6
	Maximum Drain Source Resistance Rds 0.165Ω
	Typical Gate Charge Qg @ Vgs 7.6nC
	Minimum Operating Temperature -55°C
	Maximum Power Dissipation Pd 2.8W
	Forward Voltage Vf -1.2V
	Maximum Gate Source Voltage Vgs 8V
	Maximum Operating Temperature 150°C
	Standards/Approvals RoHS
	Height 1.1mm
	Automotive Standard No

Datasheet - SI1427EDH-T1-GE3

Vishay SI1427EDH Series MOSFET, 20V Maximum Drain Source Voltage, 2A Maximum Continuous Drain Current - SI1427EDH-T1-GE3

This p-channel MOSFET is a surface-mount semiconductor intended for switching and power-management roles in compact electronic assemblies. It operates across a wide temperature span suitable for demanding conditions and is provided in a low-profile package for space-constrained board designs.

Features and Benefits:

• Low Rds(on) 0.165Ω for reduced conduction losses
• Continuous drain current rating of 2A for medium-power switching
• Drain-source voltage rating of 20V enables low-voltage systems
• Typical gate charge 7.6 nC for predictable switching performance
• Forward voltage of -1.2V minimises voltage drop during conduction
• RoHS compliant for use in regulated manufacturing environments

Applications

• Suitable for battery-protection and load-switch circuits
• Ideal for handheld and portable device power paths
• Used with DC-DC converters in compact assemblies
• Can be used for reverse-current blocking in power rails
• Suitable for low-voltage motor-control gate arrangements

What package considerations affect board layout?

It is supplied in an SC-70 package with six pins, permitting tight pad arrangements and straightforward reflow soldering for dense surface-mount designs.

How does thermal performance influence cooling requirements?

Maximum power dissipation is 2.8 W, so PCB copper area and thermal vias should be sized to remove heat when operating near that dissipation level.

What gate limitations must designers observe?

The gate must not exceed 8V relative to the source to avoid damaging the device, and the typical gate charge of 7.6 nC guides driver selection.

How does the device cope with extreme ambient conditions?

It is rated to function from -55 °C up to +150 °C, permitting use where wide thermal endurance is required.