Fluke I200S Current Clamp, AC Adapter, 200 A ac AC Max, Voltage Output
- RS庫存編號:
- 122-4790
- Distrelec 貨號:
- 176-12-450
- 製造零件編號:
- I200S
- 製造商:
- Fluke
小計(1 件)*
TWD15,610.00
(不含稅)
TWD16,390.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2 件從 2026年11月23日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD15,610.00 |
* 參考價格
- RS庫存編號:
- 122-4790
- Distrelec 貨號:
- 176-12-450
- 製造零件編號:
- I200S
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Current Clamp | |
| Adapter Type | AC | |
| Maximum AC Current | 200A ac | |
| Accuracy | ± 1.5 % | |
| Maximum Conductor Size | 20mm | |
| Output Type | Voltage | |
| Cable Length | 2m | |
| Connector Type | BNC | |
| Battery Type | AA | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | EN61010 | |
| Model Number | I200S | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 600V | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Current Clamp | ||
Adapter Type AC | ||
Maximum AC Current 200A ac | ||
Accuracy ± 1.5 % | ||
Maximum Conductor Size 20mm | ||
Output Type Voltage | ||
Cable Length 2m | ||
Connector Type BNC | ||
Battery Type AA | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals EN61010 | ||
Model Number I200S | ||
Safety Category Level CAT III | ||
Safety Category Voltage 600V | ||
豁免
- COO (Country of Origin):
- FR
Fluke Current Clamp, 240A Maximum AC Current, 20x5mm Maximum Conductor Size - I200S
This current clamp is an AC clamp probe designed to extend the current measurement range of scopes, power analysers and multimeters without interrupting circuits. It provides a voltage output via a safety-insulated BNC connector and includes an adaptor for connection to instruments with banana inputs. The clamp accepts single conductors and flat busbars, operates across a wide usable frequency band, and is intended for field and bench use in industrial environments.
Features & Benefits
• Dual ranges offering 20A and 200A with usable span
• 1.5% accuracy with added offset for precise readings
• Voltage output compatible with BNC-equipped instruments
• Measures up to 240A non-destructively for fault checks
• 2m cable for flexible connection to test equipment
• Accepts conductors up to 20x5mm for busbar work
• 1.5% accuracy with added offset for precise readings
• Voltage output compatible with BNC-equipped instruments
• Measures up to 240A non-destructively for fault checks
• 2m cable for flexible connection to test equipment
• Accepts conductors up to 20x5mm for busbar work
**Applications**
• Suitable for load monitoring on control panels and switchgear
• Ideal for clamp-on current measurement during commissioning
• Used with DMMs for maintenance diagnostics on motors
• Can be used for HVAC current checks where Compact probes fit
• Used for power quality or waveform capture with scopemeters
• Ideal for clamp-on current measurement during commissioning
• Used with DMMs for maintenance diagnostics on motors
• Can be used for HVAC current checks where Compact probes fit
• Used for power quality or waveform capture with scopemeters
What frequency range can it accurately follow?
It operates useably from 40Hz up to 10kHz, supporting mains and higher-frequency diagnostic measurements.
How is the clamp connected to different instruments?
The probe has a safety-insulated BNC output and includes a dual-banana to BNC adaptor for meters with banana inputs.
What is the lowest current reliably measurable?
The clamp can detect currents down to 0.1A in its lower range, suitable for light-load measurements.
What power source does the probe require for operation?
It uses a single AA battery as its power source for internal electronics.
What safety and standards apply to its use?
The device meets EN 61010 requirements and is rated to CAT III 600V for safe use on installation-level circuits.
Standards
EN61010, CAT III 600 V
相關連結
- Fluke I310S Current Clamp AC/DC Adapter Voltage Output
- Fluke I800 Current Clamp 800 A AC Max, Current Output
- Fluke 80i-110s Current Clamp BNC Adapter Adapter Current, Voltage Output
- Fluke I30S Current Clamp AC/DC Adapter Voltage Output
- Fluke I1010 Current Clamp AC/DC Adapter Voltage Output
- Fluke I410 Current Clamp AC/DC Adapter Voltage Output
- Fluke i400 Current Clamp 400 A AC Max, Current Output
- Fluke 17XX-CLAMP-ADPT-1V Current Clamp, BNC Adapter Adapter
