Fluke i400 Current Clamp, AC Adapter, 400 A AC Max, Current Output
- RS庫存編號:
- 520-2532
- Distrelec 貨號:
- 176-12-427
- 製造零件編號:
- Fluke i400
- 製造商:
- Fluke
小計（1 件）*
TWD9,749.00
(不含稅)
TWD10,236.45
(含稅)
訂單超過 $1,300.00 免費送貨
製造商存貨
- 準備從 2026年10月09日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD9,749.00 |
* 參考價格
- RS庫存編號:
- 520-2532
- Distrelec 貨號:
- 176-12-427
- 製造零件編號:
- Fluke i400
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Current Clamp | |
| Adapter Type | AC | |
| Maximum AC Current | 400A | |
| Accuracy | ± 2 % + 0.06 A | |
| Maximum Conductor Size | 32mm | |
| Output Type | Current | |
| Cable Length | 1.5m | |
| Connector Type | Banana Jack | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Model Number | i400 | |
| Standards/Approvals | No | |
| Safety Category Voltage | 600, 1000V | |
| Safety Category Level | CAT IV, CAT III | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Current Clamp | ||
Adapter Type AC | ||
Maximum AC Current 400A | ||
Accuracy ± 2 % + 0.06 A | ||
Maximum Conductor Size 32mm | ||
Output Type Current | ||
Cable Length 1.5m | ||
Connector Type Banana Jack | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Model Number i400 | ||
Standards/Approvals No | ||
Safety Category Voltage 600, 1000V | ||
Safety Category Level CAT IV, CAT III | ||
豁免
- COO (Country of Origin):
- TW
Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size - Fluke i400
This current clamp is a Compact AC clamp designed to work with digital multimeters to measure alternating current without interrupting circuits. It delivers an output proportional to measured current for straightforward interfacing with meters and is intended for use in demanding electrical environments where high safety ratings are required.
Features & Benefits
• Measures up to 400A while allowing continuous operation at working currents
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks
**Applications**
• Suitable for plant maintenance teams performing load analysis
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter
What conductor sizes can it clamp around?
It accepts conductors up to 32mm diameter and accommodates large busbar sizes specified as 750MCM.
How does it behave at temperatures encountered on site?
It is rated to operate safely between 0°C and 50°C for typical ambient working conditions.
What is the maximum non-destructive current it can withstand?
The device can tolerate short-term currents up to 1000A without permanent damage.
How low a current can it reliably detect?
The lowest measurable current is 1A, suitable for detecting light loads and standby currents.
相關連結
- Fluke I410 Current Clamp AC/DC Adapter Voltage Output
- Fluke I800 Current Clamp 800 A AC Max, Current Output
- Fluke I200 Current Clamp 240 A AC Max, Current Output
- Fluke I200S Current Clamp 240 A AC Max, Voltage Output
- Fluke I3000 FLEX Current Clamp 3000 A AC Max, Current Output
- Fluke I310S Current Clamp AC/DC Adapter Voltage Output
- Fluke I30 Current Clamp AC/DC Adapter Current Output
- RS PRO Current Clamp 400 A AC Max, Current/Voltage Output