Fluke 80i-110s Current Clamp, 100 A DC Max, BNC Adapter Adapter, 100 A AC Max, Current, Voltage Output
- RS庫存編號:
- 188-4130
- Distrelec 貨號:
- 176-12-955
- 製造零件編號:
- 80I-110S
- 製造商:
- Fluke
小計（1 件）*
TWD47,080.00
(不含稅)
TWD49,434.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 3 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD47,080.00 |
* 參考價格
- RS庫存編號:
- 188-4130
- Distrelec 貨號:
- 176-12-955
- 製造零件編號:
- 80I-110S
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Current Clamp | |
| Adapter Type | BNC Adapter | |
| Maximum DC Current | 100A | |
| Maximum AC Current | 100A | |
| Accuracy | ± 3 % of Reading + 50 mA | |
| Maximum Conductor Size | 11.8mm | |
| Cable Length | 1.6m | |
| Output Type | Current, Voltage | |
| Connector Type | BNC | |
| Battery Type | IEC 6LR61 | |
| Minimum Operating Temperature | 0°C | |
| Battery Life | 55h | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | IEC 1010 and CSAC22.2 | |
| Model Number | 80i-110s | |
| Safety Category Voltage | 600V, 300V | |
| Safety Category Level | CAT II, CAT III | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Current Clamp | ||
Adapter Type BNC Adapter | ||
Maximum DC Current 100A | ||
Maximum AC Current 100A | ||
Accuracy ± 3 % of Reading + 50 mA | ||
Maximum Conductor Size 11.8mm | ||
Cable Length 1.6m | ||
Output Type Current, Voltage | ||
Connector Type BNC | ||
Battery Type IEC 6LR61 | ||
Minimum Operating Temperature 0°C | ||
Battery Life 55h | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals IEC 1010 and CSAC22.2 | ||
Model Number 80i-110s | ||
Safety Category Voltage 600V, 300V | ||
Safety Category Level CAT II, CAT III | ||
豁免
- COO (Country of Origin):
- FR
Fluke Current Clamp, 100A Maximum AC Current, 11.8mm Maximum Conductor Size - 80I-110S
This current clamp measures AC and DC currents and outputs a proportional voltage for connection to scope, analyser or meter inputs via a BNC interface. It is intended for use alongside test tools that accept BNC connections and supports measurement of conductors commonly found in industrial and commercial electrical systems.
Features & Benefits
• Measures 0.1–100A AC or DC for broad current coverage
• High-accuracy probe ±3% of reading Plus 50mA for precise readings
• Bandwidth DC–100kHz to capture fast signals and harmonics
• Output levels 100mV/A and 10mV/A for flexible interfacing
• 1.6m cable with BNC adaptor for convenient connection to instruments
• Safety-rated CAT II 600V and CAT III 300V for specified installation categories
• High-accuracy probe ±3% of reading Plus 50mA for precise readings
• Bandwidth DC–100kHz to capture fast signals and harmonics
• Output levels 100mV/A and 10mV/A for flexible interfacing
• 1.6m cable with BNC adaptor for convenient connection to instruments
• Safety-rated CAT II 600V and CAT III 300V for specified installation categories
**Applications**
• Suitable for power quality analysis with oscilloscopes and analysers
• Ideal for commissioning and fault diagnosis in automation systems
• Used for load studies and harmonic measurement on inverters and drives
• Can be used for preventative maintenance on industrial electrical panels
• Used with multimeters converted to BNC inputs for portable field checks
• Ideal for commissioning and fault diagnosis in automation systems
• Used for load studies and harmonic measurement on inverters and drives
• Can be used for preventative maintenance on industrial electrical panels
• Used with multimeters converted to BNC inputs for portable field checks
What is the maximum conductor size the clamp accepts?
The jaw accommodates conductors up to 11.8mm diameter enabling measurements on single-core cables and small busbars.
How is the clamp powered and how long will it run between battery changes?
It operates from a single IEC 6LR61 battery and provides approximately 55h of operation under typical conditions.
Which output amplitude should I use for higher resolution on low currents?
Use the 100mV/A output setting when measuring in the 0.1–10A range to improve signal amplitude for small currents.
What environmental temperatures can it tolerate during use?
The device is specified for operation between 0°C and 50°C, suitable for most indoor industrial environments.
相關連結
- Fluke PM9081 Banana Plug Dual Male to Female BNC Adapter for Use with 80i-110s
- Fluke I200S Current Clamp 240 A AC Max, Voltage Output
- Fluke I3000 FLEX Current Clamp 3000 A AC Max, Current Output
- Fluke 17XX Current Clamp, BNC Adapter Adapter
- Fluke 17XX-CLAMP-ADPT-1V Current Clamp, BNC Adapter Adapter
- Fluke I800 Current Clamp 800 A AC Max, Current Output
- Fluke I310S Current Clamp AC/DC Adapter Voltage Output
- Fluke i400 Current Clamp 400 A AC Max, Current Output