FTDI Chip FT4233HPQ-TRAY, USB Controller, 4-Channel, 12Mbps, USB 2.0, 3.3 V, 76-Pin QFN-76

查看所有USB Interface ICs
可享批量折扣

小計（1 件）*

TWD252.00

(不含稅)

TWD264.60

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 512 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 9TWD252.00
10 +TWD245.00

* 參考價格

包裝方式：
RS庫存編號:
228-3130
製造零件編號:
FT4233HPQ-TRAY
製造商:
FTDI Chip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

FTDI Chip

Number of Transceivers

4

Data Rate

12Mbps

IC Type

Controller IC

Protocols Supported

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Package Type

QFN-76

Pin Count

76

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0
2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM
PD mode configuration through external EEPROM
Options to use external MCU controlling PD policy through I2C interface
Up to 8 Configurable PD GPIO pins support
External MCU support through I2C bus
External EEPROM support for USB device configuration and PD profile

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


相關連結