FTDI Chip, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 56-Pin QFN

此圖片僅供參考,請參閲產品詳細資訊及規格

可享批量折扣

小計(1 托盤,共 260 件)*

TWD42,302.00

(不含稅)

TWD44,418.40

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 520 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每托盤*
260 - 1040TWD162.70TWD42,302.00
1300 +TWD159.40TWD41,444.00

* 參考價格

RS庫存編號:
228-3122
製造零件編號:
FT232HPQ-TRAY
製造商:
FTDI Chip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

FTDI Chip

Product Type

Controller IC

Maximum Data Rate

12Mbps

Number of Transceivers

1

USB Specification

USB Type C

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

1.32V

Minimum Supply Voltage

3.3V

Mount Type

Surface

Package Type

QFN

Pin Count

56

Supported Protocols

USB 2.0

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Length

8mm

Height

0.9mm

Standards/Approvals

No

Series

FT232HP

Width

8 mm

Automotive Standard

No

The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.

Supports PD Specification 3.0.

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.

PD mode configuration through external EEPROM.

Options to use external MCU controlling PD policy through I2C interface.

Up to 8 Configurable PD GPIO pins support.

External MCU support through I2C bus.

相關連結