FTDI Chip FT233HPQ-TRAY, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 64-Pin QFN

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有USB Interface ICs
可享批量折扣

小計（1 件）*

TWD168.00

(不含稅)

TWD176.40

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 270 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 9TWD168.00
10 +TWD164.00

* 參考價格

包裝方式：
RS庫存編號:
228-3125
製造零件編號:
FT233HPQ-TRAY
製造商:
FTDI Chip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

FTDI Chip

Maximum Data Rate

12Mbps

Number of Transceivers

1

Product Type

Controller IC

USB Specification

USB Type C

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Minimum Supply Voltage

3.3V

Maximum Supply Voltage

1.32V

Mount Type

Surface

Package Type

QFN

Pin Count

64

Minimum Operating Temperature

-40°C

Supported Protocols

USB 2.0

Maximum Operating Temperature

85°C

Standards/Approvals

No

Length

9mm

Width

9 mm

Series

FT233HP

Height

0.9mm

Automotive Standard

No

The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.

Supports PD Specification 3.0.

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.

PD mode configuration through external EEPROM.

Options to use external MCU controlling PD policy through I2C interface.

Up to 8 Configurable PD GPIO pins support.

External MCU support through I2C bus.

相關連結