FTDI Chip, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 64-Pin QFN
- RS庫存編號:
- 228-3124
- 製造零件編號:
- FT233HPQ-TRAY
- 製造商:
- FTDI Chip
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 托盤,共 260 件)*
TWD43,498.00
(不含稅)
TWD45,671.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 260 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每托盤* |
|---|---|---|
| 260 - 1040 | TWD167.30 | TWD43,498.00 |
| 1300 + | TWD164.00 | TWD42,640.00 |
* 參考價格
- RS庫存編號:
- 228-3124
- 製造零件編號:
- FT233HPQ-TRAY
- 製造商:
- FTDI Chip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FTDI Chip | |
| Number of Transceivers | 1 | |
| Product Type | Controller IC | |
| Maximum Data Rate | 12Mbps | |
| USB Specification | USB Type C | |
| Sub Type | Controller | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Maximum Supply Voltage | 1.32V | |
| Minimum Supply Voltage | 3.3V | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Pin Count | 64 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB 2.0 | |
| Maximum Operating Temperature | 85°C | |
| Length | 9mm | |
| Height | 0.9mm | |
| Width | 9 mm | |
| Series | FT233HP | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 FTDI Chip | ||
Number of Transceivers 1 | ||
Product Type Controller IC | ||
Maximum Data Rate 12Mbps | ||
USB Specification USB Type C | ||
Sub Type Controller | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Maximum Supply Voltage 1.32V | ||
Minimum Supply Voltage 3.3V | ||
Mount Type Surface | ||
Package Type QFN | ||
Pin Count 64 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB 2.0 | ||
Maximum Operating Temperature 85°C | ||
Length 9mm | ||
Height 0.9mm | ||
Width 9 mm | ||
Series FT233HP | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.
Supports PD Specification 3.0.
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface.
Up to 8 Configurable PD GPIO pins support.
External MCU support through I2C bus.
相關連結
- FTDI Chip FT233HPQ-TRAY 12Mbps 3.3 V, 64-Pin QFN 64
- FTDI Chip FT2232HQ-TRAY 12Mbps 64-Pin QFN
- FTDI Chip FT4232HQ-TRAY 12Mbps 64-Pin QFN
- FTDI Chip FT232HPQ-TRAY 12Mbps 3.3 V, 56-Pin QFN 56
- FTDI Chip FT2232HQ-REEL 12Mbps 64-Pin QFN
- FTDI Chip FT4232HQ-REEL 12Mbps 64-Pin QFN
- FTDI Chip FT232HQ-TRAY 12Mbps 48-Pin QFN
- FTDI Chip FT4233HPQ-TRAY 4-Channel USB 2.0 76-Pin QFN-76
