FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

RS庫存編號:: 228-3129
製造零件編號:: FT4233HPQ-TRAY
製造商:: FTDI Chip

FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 托盤，共 260 件）*

TWD65,754.00

(不含稅)

TWD69,040.40

訂單超過 $1,300.00 免費送貨

有庫存

260 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每托盤*
260 - 1040	TWD252.90	TWD65,754.00
1300 +	TWD247.80	TWD64,428.00

* 參考價格

RS庫存編號:: 228-3129
製造零件編號:: FT4233HPQ-TRAY
製造商:: FTDI Chip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	FTDI Chip
	Product Type	Controller IC
	Number of Transceivers	4
	Maximum Data Rate	12Mbps
	USB Specification	USB Type C
	Sub Type	Controller
	Power Supply Type	Single
	ESD Protection	Yes
	Minimum Supply Voltage	3.3V
	Maximum Supply Voltage	1.32V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	76
	Minimum Operating Temperature	-40°C
	Supported Protocols	USB 2.0
	Maximum Operating Temperature	85°C
	Length	8.85mm
	Standards/Approvals	RoHS
	Width	8.85 mm
	Series	FT4233HP
	Height	1mm
	Automotive Standard	No
	Supply Current	0.87mA

	選取全部
	品牌 FTDI Chip
	Product Type Controller IC
	Number of Transceivers 4
	Maximum Data Rate 12Mbps
	USB Specification USB Type C
	Sub Type Controller
	Power Supply Type Single
	ESD Protection Yes
	Minimum Supply Voltage 3.3V
	Maximum Supply Voltage 1.32V
	Mount Type Surface
	Package Type QFN
	Pin Count 76
	Minimum Operating Temperature -40°C
	Supported Protocols USB 2.0
	Maximum Operating Temperature 85°C
	Length 8.85mm
	Standards/Approvals RoHS
	Width 8.85 mm
	Series FT4233HP
	Height 1mm
	Automotive Standard No
	Supply Current 0.87mA

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0

2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source

Type-C/PD Physical Layer Protocol

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM

PD mode configuration through external EEPROM

Options to use external MCU controlling PD policy through I2C interface

Up to 8 Configurable PD GPIO pins support

External MCU support through I2C bus

External EEPROM support for USB device configuration and PD profile

FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

訂單超過 $1,300.00 免費送貨

相關連結