FTDI Chip, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

RS庫存編號:: 228-3118
製造零件編號:: FT2232HPQ-TRAY
製造商:: FTDI Chip

FTDI Chip, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 托盤，共 260 件）*

TWD53,404.00

(不含稅)

TWD56,074.20

訂單超過 $1,300.00 免費送貨

有庫存

520 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每托盤*
260 - 1040	TWD205.40	TWD53,404.00
1300 +	TWD201.30	TWD52,338.00

* 參考價格

RS庫存編號:: 228-3118
製造零件編號:: FT2232HPQ-TRAY
製造商:: FTDI Chip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	FTDI Chip
	Product Type	Controller IC
	Maximum Data Rate	12Mbps
	Number of Transceivers	2
	Sub Type	Controller
	USB Specification	USB Type C
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	1.32V
	Minimum Supply Voltage	3.3V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	68
	Supported Protocols	USB 2.0
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Series	FT2232HP
	Width	8 mm
	Standards/Approvals	RoHS
	Length	8mm
	Height	0.9mm
	Supply Current	0.83mA
	Automotive Standard	No

	選取全部
	品牌 FTDI Chip
	Product Type Controller IC
	Maximum Data Rate 12Mbps
	Number of Transceivers 2
	Sub Type Controller
	USB Specification USB Type C
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 1.32V
	Minimum Supply Voltage 3.3V
	Mount Type Surface
	Package Type QFN
	Pin Count 68
	Supported Protocols USB 2.0
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Series FT2232HP
	Width 8 mm
	Standards/Approvals RoHS
	Length 8mm
	Height 0.9mm
	Supply Current 0.83mA
	Automotive Standard No

The FTDI Chip FT2233HP/FT2232HP is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 2 independent channels compatible with the FT2232H – Dual Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0.

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.

PD mode configuration through external EEPROM.

Options to use external MCU controlling PD policy through I2C interface.

Up to 8 Configurable PD GPIO pins support.

External MCU support through I2C bus

FTDI Chip, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

訂單超過 $1,300.00 免費送貨

相關連結