SKF 31312 J2/QDF Taper 60 mm ID Roller Bearing, 130 mm OD
- RS庫存編號:
- 232-2812
- 製造零件編號:
- 31312 J2/QDF
- 製造商:
- SKF
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
TWD31,941.00
(不含稅)
TWD33,538.05
(含稅)
訂單超過 $1,300.00 免費送貨
製造商存貨
- 準備從 2026年7月01日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD31,941.00 |
* 參考價格
- RS庫存編號:
- 232-2812
- 製造零件編號:
- 31312 J2/QDF
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Tapered | |
| Cage Material | Sheet Metal | |
| Number of Rows | 2 | |
| Bearing Material | Stainless Steel | |
| Cone Width | 33.5mm | |
| Static Load Rating | 335kN | |
| Bearing Dynamic Load Rating | 303kN | |
| Limiting Speed | 5300rpm | |
| Standards/Approvals | No | |
| Series | 31312 | |
| Outside Diameter | 130mm | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Tapered | ||
Cage Material Sheet Metal | ||
Number of Rows 2 | ||
Bearing Material Stainless Steel | ||
Cone Width 33.5mm | ||
Static Load Rating 335kN | ||
Bearing Dynamic Load Rating 303kN | ||
Limiting Speed 5300rpm | ||
Standards/Approvals No | ||
Series 31312 | ||
Outside Diameter 130mm | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in perio
相關連結
- SKF 31312 Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 30204 J2/Q Taper 20 mm ID Roller Bearing, 47 mm OD
- SKF 30205 J2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 31309 J2/QCL7CDF Taper 44 mm ID Roller Bearing, 100 mm OD