SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- RS庫存編號:
- 208-0184
- 製造零件編號:
- 32311 J2
- 製造商:
- SKF
小計（1 件）*
TWD3,543.00
(不含稅)
TWD3,720.15
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年9月25日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,543.00 |
* 參考價格
- RS庫存編號:
- 208-0184
- 製造零件編號:
- 32311 J2
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Parallel | |
| Series | 32311 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 245kN | |
| End Type | Shielded | |
| Outside Diameter | 120mm | |
| Static Load Rating | 250kN | |
| Cup Width | 35mm | |
| Number of Rows | 1 | |
| Limiting Speed | 5600rpm | |
| Cone Width | 45.5mm | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Parallel | ||
Series 32311 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 245kN | ||
End Type Shielded | ||
Outside Diameter 120mm | ||
Static Load Rating 250kN | ||
Cup Width 35mm | ||
Number of Rows 1 | ||
Limiting Speed 5600rpm | ||
Cone Width 45.5mm | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32211 J2/Q Taper 55 mm ID Roller Bearing, 100 mm OD
- SKF 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 30204 J2/Q Taper 20 mm ID Roller Bearing, 47 mm OD
- SKF 30205 J2/Q Taper 25 mm ID Roller Bearing, 52 mm OD