SKF 31309 J2/QCL7C Taper 44 mm ID Roller Bearing, 100 mm OD
- RS庫存編號:
- 208-0005
- 製造零件編號:
- 31309 J2/QCL7C
- 製造商:
- SKF
小計（1 件）*
TWD4,389.00
(不含稅)
TWD4,608.45
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2 件從 2026年11月02日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD4,389.00 |
* 參考價格
- RS庫存編號:
- 208-0005
- 製造零件編號:
- 31309 J2/QCL7C
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 44mm | |
| Bore Type | Parallel | |
| Outside Diameter | 100mm | |
| Limiting Speed | 6700rpm | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Series | 31309 | |
| Cup Width | 18mm | |
| Bearing Dynamic Load Rating | 113kN | |
| Cone Width | 27.25mm | |
| End Type | Shielded | |
| Static Load Rating | 102kN | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 44mm | ||
Bore Type Parallel | ||
Outside Diameter 100mm | ||
Limiting Speed 6700rpm | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Series 31309 | ||
Cup Width 18mm | ||
Bearing Dynamic Load Rating 113kN | ||
Cone Width 27.25mm | ||
End Type Shielded | ||
Static Load Rating 102kN | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 31309 J2/QCL7CDF Taper 44 mm ID Roller Bearing, 100 mm OD
- RS PRO 31309 Taper 44 mm ID Roller Bearing, 100 mm OD
- SKF M 88010/2/QCL7C Single Row Tapered Roller Taper Roller Bearing, 68.262 mm OD
- SKF HM 89410/2/QCL7C Single Row Tapered Roller Taper Roller Bearing, 76.2 mm OD
- SKF M 86647/610/QCL7C Taper Roller 28.5 mm ID Roller Bearing, 64.2 mm OD
- SKF BT1B 243150/QCL7C Taper Roller 75 mm ID Tapered Roller Bearing, 160 mm OD
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF T7FC 060/QCL7C Taper 60 mm ID Roller Bearing, 125 mm OD