小計（1 件）*
TWD5,886.00
(不含稅)
TWD6,180.30
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年7月03日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD5,886.00 |
* 參考價格
- RS庫存編號:
- 208-0009
- 製造零件編號:
- 31312
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Parallel | |
| Cup Width | 22mm | |
| Static Load Rating | 166kN | |
| Limiting Speed | 5300rpm | |
| Number of Rows | 1 | |
| Cone Width | 33.5mm | |
| Outside Diameter | 130mm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 177kN | |
| Standards/Approvals | No | |
| Series | 4CC | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Parallel | ||
Cup Width 22mm | ||
Static Load Rating 166kN | ||
Limiting Speed 5300rpm | ||
Number of Rows 1 | ||
Cone Width 33.5mm | ||
Outside Diameter 130mm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 177kN | ||
Standards/Approvals No | ||
Series 4CC | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 31312 J2/QDF Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 32312 Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 32312 BJ2/QCL7C Taper 60 mm ID Roller Bearing, 130 mm OD
- NTN 32312U Taper Roller 60 mm ID Roller Bearing, 130 mm OD
- NTN 30312U Taper Roller 60 mm ID Roller Bearing, 130 mm OD
- SKF 32226 Taper 130 mm ID Roller Bearing, 230 mm OD
- SKF 33116 Taper 80 mm ID Roller Bearing, 130 mm OD
- SKF 30215 Taper 75 mm ID Roller Bearing, 130 mm OD