onsemi NCP1618HDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
- RS庫存編號:
- 261-9532
- 製造零件編號:
- NCP1618HDR2G
- 製造商:
- onsemi
可享批量折扣
小計（1 包，共 5 件）*
TWD277.00
(不含稅)
TWD290.85
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,450 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 5 | TWD55.40 | TWD277.00 |
| 10 - 95 | TWD50.00 | TWD250.00 |
| 100 - 245 | TWD45.00 | TWD225.00 |
| 250 - 495 | TWD40.40 | TWD202.00 |
| 500 + | TWD36.40 | TWD182.00 |
* 參考價格
- RS庫存編號:
- 261-9532
- 製造零件編號:
- NCP1618HDR2G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Maximum Switching Frequency | 130 kHz | |
| Start-up Supply Current | 4mA | |
| Maximum Source Current | 500mA | |
| IC Type | Power Factor Controller IC | |
| Maximum Sink Current | 800mA | |
| Maximum Supply Current | 4 mA | |
| Package Type | SOIC | |
| Pin Count | 10 | |
| Maximum Operating Supply Voltage | 35 V | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Maximum Switching Frequency 130 kHz | ||
Start-up Supply Current 4mA | ||
Maximum Source Current 500mA | ||
IC Type Power Factor Controller IC | ||
Maximum Sink Current 800mA | ||
Maximum Supply Current 4 mA | ||
Package Type SOIC | ||
Pin Count 10 | ||
Maximum Operating Supply Voltage 35 V | ||
The ON Semiconductor power factor correction is an innovative multimode power factor controller with the circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line load range. In very light−load conditions, the circuit can enter the soft skip mode for minimized losses.
Internal compensation of the regulation loop
Switching frequency is lower than 130 kHz
Unity power factor
Switching frequency is lower than 130 kHz
Unity power factor