onsemi NCP1618KDR2G, Power Factor Controller IC 130 kHz 10-Pin, SOIC 35V
- RS庫存編號:
- 261-9537
- 製造零件編號:
- NCP1618KDR2G
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 5 件）*
TWD235.00
(不含稅)
TWD246.75
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 5 | TWD47.00 | TWD235.00 |
| 10 - 95 | TWD42.20 | TWD211.00 |
| 100 - 245 | TWD38.20 | TWD191.00 |
| 250 - 495 | TWD34.20 | TWD171.00 |
| 500 + | TWD31.00 | TWD155.00 |
* 參考價格
- RS庫存編號:
- 261-9537
- 製造零件編號:
- NCP1618KDR2G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 4mA | |
| Sub Type | Controller | |
| Maximum Source Current | 500mA | |
| Maximum Sink Current | 800mA | |
| Switching Frequency | 130kHz | |
| Supply Current | 4mA | |
| Package Type | SOIC | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 9.6V | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Series | NCP1618 | |
| Standards/Approvals | RoHS | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 4mA | ||
Sub Type Controller | ||
Maximum Source Current 500mA | ||
Maximum Sink Current 800mA | ||
Switching Frequency 130kHz | ||
Supply Current 4mA | ||
Package Type SOIC | ||
Pin Count 10 | ||
Minimum Supply Voltage 9.6V | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Series NCP1618 | ||
Standards/Approvals RoHS | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor power factor correction is an innovative multimode power factor controller with the circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line load range. In very light−load conditions, the circuit can enter the soft skip mode for minimized losses.
Continuous conduction mode
Switching frequency is lower than 130 kHz
Line range detection