onsemi NCP1655ADR2G, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V
- RS庫存編號:
- 221-6628
- 製造零件編號:
- NCP1655ADR2G
- 製造商:
- onsemi
可享批量折扣
小計（1 包，共 10 件）*
TWD423.00
(不含稅)
TWD444.20
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 2,470 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 10 | TWD42.30 | TWD423.00 |
| 20 - 90 | TWD41.30 | TWD413.00 |
| 100 - 240 | TWD40.30 | TWD403.00 |
| 250 - 490 | TWD39.20 | TWD392.00 |
| 500 + | TWD38.10 | TWD381.00 |
* 參考價格
- RS庫存編號:
- 221-6628
- 製造零件編號:
- NCP1655ADR2G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Product Type | Power Factor Correction IC | |
| Sub Type | Power Factor Controller | |
| Maximum Source Current | 500mA | |
| Maximum Sink Current | 800mA | |
| Switching Frequency | 130kHz | |
| Supply Current | 4mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 9.5V | |
| Pin Count | 9 | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Series | NCP1655A | |
| Length | 5mm | |
| Height | 1.75mm | |
| Width | 4 mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Product Type Power Factor Correction IC | ||
Sub Type Power Factor Controller | ||
Maximum Source Current 500mA | ||
Maximum Sink Current 800mA | ||
Switching Frequency 130kHz | ||
Supply Current 4mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 9.5V | ||
Pin Count 9 | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Series NCP1655A | ||
Length 5mm | ||
Height 1.75mm | ||
Width 4 mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP1655 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses.
Fast line / load transient compensation (Dynamic Response Enhancer)
Large VCC operating range (9.5 V to 35 V)
Line range detection