規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	onsemi
	Product Type	Power Factor Correction IC
	Maximum Source Current	500mA
	Sub Type	Power Factor Controller
	Maximum Sink Current	800mA
	Switching Frequency	130kHz
	Supply Current	4mA
	Zero Power Detection	Yes
	Mount Type	Surface
	Package Type	SOIC
	Pin Count	9
	Minimum Supply Voltage	9.5V
	Maximum Supply Voltage	35V
	Minimum Operating Temperature	-40°C
	Height	1.75mm
	Width	4 mm
	Standards/Approvals	No
	Series	NCP1655A
	Length	5mm
	Maximum Operating Temperature	125°C
	Automotive Standard	No

	選取全部
	品牌 onsemi
	Product Type Power Factor Correction IC
	Maximum Source Current 500mA
	Sub Type Power Factor Controller
	Maximum Sink Current 800mA
	Switching Frequency 130kHz
	Supply Current 4mA
	Zero Power Detection Yes
	Mount Type Surface
	Package Type SOIC
	Pin Count 9
	Minimum Supply Voltage 9.5V
	Maximum Supply Voltage 35V
	Minimum Operating Temperature -40°C
	Height 1.75mm
	Width 4 mm
	Standards/Approvals No
	Series NCP1655A
	Length 5mm
	Maximum Operating Temperature 125°C
	Automotive Standard No

Datasheet - NCP1655ADR2G

The ON Semiconductor NCP1655 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses.

Fast line / load transient compensation (Dynamic Response Enhancer)

Large VCC operating range (9.5 V to 35 V)

Line range detection

onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V

相關連結