onsemi NCP1618DDR2G, Power Factor Controller IC 130 kHz 27-Pin, DIP 9.5 V

此圖片僅供參考,請參閲產品詳細資訊及規格

暫時無法供應
我們無法確定此產品何時有貨,RS 預計將其從我們的產品目錄中移除。
包裝方式:
RS庫存編號:
233-6821
製造零件編號:
NCP1618DDR2G
製造商:
onsemi
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

onsemi

Product Type

Power Factor Controller IC

Start-up Supply Current

1.3mA

Sub Type

Power Factor Controller

Maximum Source Current

500mA

Maximum Sink Current

800mA

Switching Frequency

130kHz

Supply Current

4mA

Zero Power Detection

Yes

Mount Type

Surface

Package Type

DIP

Pin Count

27

Minimum Supply Voltage

9.5V

Maximum Supply Voltage

9.5V

Minimum Operating Temperature

-40°C

Width

4 mm

Series

NCP1618D

Standards/Approvals

No

Length

5mm

Height

1.75mm

Maximum Operating Temperature

125°C

Automotive Standard

No

The ON Semiconductor NCP1618DDR2G is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses. Housed in a SO-9 package, the circuit further incorporates the features necessary for robust and compact PFC stages, with few external components

A High-voltage start-up current source for VCC capacitor charge at startup

It has an internal compensation of the regulation loop

It offers Soft and Fast-overvoltage protection

It offers Line-Sag and Brown-out detection

相關連結