Time Electronics 7007 Loop Calibrator Battery

查看所有Loop Calibrators

小計（1 件）*

TWD12,125.00

(不含稅)

TWD12,731.25

(含稅)

Add to Basket
選擇或輸入數量
下方訂單 TWD1,300.00（不含稅）成本 TWD500.00。
有庫存
  • 35 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD12,125.00

* 參考價格

RS庫存編號:
537-2603
製造零件編號:
7007
製造商:
Time Electronics
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Time Electronics

Product Type

Loop Calibrator

Model Number

7007

Accuracy

±0.05 %

Battery Life

40h

Power Source

Battery

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Width

65 mm

Weight

200g

Standards/Approvals

No

Length

30mm

Height

140mm

Hazardous Area Certification

No

豁免

COO (Country of Origin):
GB
Loop-Mate2 is a dedicated loop signal indicator and just as easy to operate. It functions as RX Sim or TX Test and the loop types are 4 - 20mA, or 0 - 10V. Display is in direct units, or % of span, and accuracy is 0.05%. It also has its own internal loop supply.

RxSim and TxTest

Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator


Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.

Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.

7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.

Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.

Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.

Features and Benefits Loop-Mate 1:


• 0.1% Accuracy

• TxSim or RxTest mode

• 25 mA max loop supply

• 140 x 65 x 30 mm dimensions

Features and Benefits Loop-Mate 2:


• 4-digit LCD display

• 0.05% accuracy

• RxSim, TxTest, 50mA/50V measure

• 140 x 65 x 30 mm dimensions

FAQ's


What is a current loop calibrator?


Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?


Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.

Note

Loop-Mate 1 is a simulator
Loop-Mate 2 is an indicator

Supplied with

Carry case, leads and technical manual

相關連結