Fluke 707 Loop Calibrator Battery 30V

RS庫存編號:: 426-2678
Distrelec 貨號:: 176-80-416
製造零件編號:: Fluke 707
製造商:: Fluke

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD48,307.00

(不含稅)

TWD50,722.35

訂單超過 $1,300.00 免費送貨

有庫存

加上 17 件從 2026年2月09日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD48,307.00

* 參考價格

RS庫存編號:: 426-2678
Distrelec 貨號:: 176-80-416
製造零件編號:: Fluke 707
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Loop Calibrator
	Accuracy	±0.015 %
	Model Number	707
	Resolution	0.001 mA
	Battery Life	18h
	Power Source	Battery
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	55°C
	Length	47mm
	Standards/Approvals	No
	Weight	350g
	Height	164mm
	Width	75 mm
	Hazardous Area Certification	No
	Safety Category Voltage	30V

	選取全部
	品牌 Fluke
	Product Type Loop Calibrator
	Accuracy ±0.015 %
	Model Number 707
	Resolution 0.001 mA
	Battery Life 18h
	Power Source Battery
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 55°C
	Length 47mm
	Standards/Approvals No
	Weight 350g
	Height 164mm
	Width 75 mm
	Hazardous Area Certification No
	Safety Category Voltage 30V

豁免

COO (Country of Origin):: CN

FLUKE Loop Calibrator, 18-Hour Battery Life, ±0.015% Best Accuracy - FLUKE-707

Not sure if your equipment is sending out the right signals? Use this calibrator from FLUKE to check the current levels in your loop circuits. Capable of measuring currents between 0 and 24mA, it's widely compatible with instrumentation that uses sensors and transmitters. Set the unit in source mode to measure passive circuits, or use the simulate function to replicate a two-wire transmitter in an external current loop. As it's HART-enabled for loops using hybrid digital and analogue communications, you can carry out different servicing and repair tasks with ease.

Features & Benefits

• Simultaneous mA and % readouts spare you from working out calculations in your head

• Best accuracy of ±0.015% means you can be confident in your test results

• User-friendly display for easy reading

• Quick-click interface helps you keep one hand free

• 18-hour battery life means you can trust it to keep working on long shifts

Applications

• Laboratories

• Plant engineering

• Factory automation

• Industrial networks

Does this instrument need recalibrating after I change the battery?

No, changing the battery won't break the calibration seal. Simply turn off your calibrator first and remove the leads before opening the battery compartment. Be sure to use a 9V battery and click the door back on.

Fluke Loop Calibrator 707

Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator. Designed for high performance one handed operation, calibration, maintenance and repairs of current loops, assisting users in working more accurately and efficiently.

A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Fluke's calibrator includes 24 volt loop supply, allowing you to power and read a transmitter at the same time.

Features and Benefits:

• Slow ramp, fast ramp and step ramp options

• Measures V DC to 28 V

• 0-100% span check (fast confirmation of zero and span

• Push button with 25% steps for linearity checks

• 0-20 mA or 4-20 mA default start up modes

• Protective yellow holster featuring test lead storage

• 24 V loop supply with mA measure

• -10°C to 55 °C operating temperature

FAQ's

What is a current loop calibrator?

Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.

How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.