Fluke 705 Loop Calibrator Battery 30V

This loop calibrator is a compact, handheld instrument for diagnosing and servicing current loops and voltage signals in industrial process control. Designed for field use, it measures and sources mA and volt signals, supplies loop power while monitoring current, and operates across a typical workshop temperature range for automation and maintenance tasks.

• 0.02% accuracy provides precise calibration for critical loops
• 0.001mA resolution enables fine measurement and sourcing adjustments
• 24V loop supply while measuring mA supports live loop checks
• Simultaneous mA and percentage display simplifies span verification
• Selectable step and ramp outputs assist automated response testing
• Battery operation using AAA cells delivers portable field use

• Suitable for commissioning and troubleshooting 4 to 20 mA transmitter loops
• Ideal for maintenance checks on PLC analogue outputs and inputs
• Used for calibration in control cabinets and on-site process diagnostics
• Can be used for verifying loop power and HART Interface resistances

Typical battery life is 18 h when sourcing at 12mA using AAA cells.

Use within -10 to 55 °C and at altitudes up to 3000m with specified humidity limits.

It meets CSA C22.2 No.1010.1 and EMC standards for industrial environments.

Current measurement and sourcing cover 0mA to 24mA with sourcing modes 0mA–20mA or 4mA–20mA while voltage checks extend to 28V DC.

9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data