小計（1 件）*
TWD10,125.00
(不含稅)
TWD10,631.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 6 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD10,125.00 |
* 參考價格
- RS庫存編號:
- 442-8301
- Distrelec 貨號:
- 176-09-555
- 製造零件編號:
- 0532424
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Test Probe | |
| Voltage | 6 kV | |
| Colour | Black, Red | |
| Tip Material | Metal | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Test Probe | ||
Voltage 6 kV | ||
Colour Black, Red | ||
Tip Material Metal | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- US
FLUKE Test Probe, 0 to 6kV Voltage Measurement Range, 1000:1 Division Ratio - 532424
Get the inside scoop on your electrical circuits with this test probe from FLUKE. It's designed to work with your AC/DC voltmeter and extend its measuring capacity up to 6kV, making it suitable for use in energy-limited circuits. The unit is constructed with your safety in mind, as it has a plastic cover that provides a barrier between you and the signals being assessed, preventing electric shock. Easily link up the probe to your test equipment with its banana plug fitting.
Features & Benefits
• Safe for use in challenging conditions thanks to an operating temperature range between 0°C and +50°C
• Accuracy of ±1% at frequencies below 500Hz for precise measurement
• Light weight of 12.7g makes it easy to handle during operation
• Performs reliably in RH up to 80%, so it's suitable for use in humid settings
Applications
• Consumer electronics
• Medical equipment
• HVAC systems
• Automotive wiring
How do I ensure accurate readings with this probe?
To be sure of precise measurements with this tool, you must check that the frequency is not above 1kHz. Output reading fails on this unit above that threshold.
Fluke Multimeter High Voltage Probes
Brought to you by Fluke, a range of high voltage probes suitable for use with Fluke multimeters. These probes, mounted on a high-quality lead, can measure voltages from 6000 V up to 40,000 V, dependent on the model. All models are highly reliable and excellent quality.
Features and Benefits
• Insulated lead attached to each probe
• Excellent quality test probes
• Banana plug connector
• CAT I safety category
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.
Note
Only suitable for low energy applications