小計（1 件）*
TWD6,363.00
(不含稅)
TWD6,681.15
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 8 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD6,363.00 |
* 參考價格
- RS庫存編號:
- 517-4689
- 製造零件編號:
- 2435108
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Voltage | 1000 V | |
| Product Type | Test Probe | |
| Colour | Red, Black | |
| Current | 500mA | |
| Probe Socket Diameter | 4mm | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Voltage 1000 V | ||
Product Type Test Probe | ||
Colour Red, Black | ||
Current 500mA | ||
Probe Socket Diameter 4mm | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- GB
Fluke TLK291 Test Probe Kit
The TLK291 test probe kit ensures optimum readings for the 9040 Fluke voltage tester.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.
Fluke 9040 phase rotation indicator
The Fluke 9040 is an effective tool for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems.
It is a phase rotation indicator that can provide clear indication of three phase systems via an LCD display and the phase rotation direction to determine correct connections.
This tool allows rapid determination of phase sequence and has a voltage (up to 700 V) and a frequency range suitable for commercial and industrial applications.
The test probes supplied have a variable clamping range for safe contact, notably with industrial sockets.
Standards
EN 61010; EN 61557-7; CAT III; 600 V