TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
- RS庫存編號:
- 680-3088
- 製造零件編號:
- 454100-000
- 製造商:
- TE Connectivity
可享批量折扣
查看批量定價選項小計（50 件, 每袋50個）*
TWD2,520.00
(不含稅)
TWD2,646.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 2,350 件從 2026年10月05日 起發貨
- 加上 150 件從 2026年10月12日 起發貨
- 加上 5,000 件從 2026年10月21日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 50 - 200 | TWD50.40 | TWD2,520.00 |
| 250 - 350 | TWD49.10 | TWD2,455.00 |
| 400 - 550 | TWD44.20 | TWD2,210.00 |
| 600 - 950 | TWD37.70 | TWD1,885.00 |
| 1000 + | TWD24.60 | TWD1,230.00 |
* 參考價格
- RS庫存編號:
- 680-3088
- 製造零件編號:
- 454100-000
- 製造商:
- TE Connectivity
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Splice Connector | |
| Overall Length | 31.5mm | |
| Minimum Wire Size AWG | 26AWG | |
| Diameter | 4.6mm | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 10AWG | |
| Colour | Blue | |
| Insulation Material | Nylon | |
| Series | DuraSeal | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Termination Type | Crimp | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 TE Connectivity | ||
Splice Type Butt | ||
Product Type Splice Connector | ||
Overall Length 31.5mm | ||
Minimum Wire Size AWG 26AWG | ||
Diameter 4.6mm | ||
Insulation Insulated | ||
Maximum Wire Size AWG 10AWG | ||
Colour Blue | ||
Insulation Material Nylon | ||
Series DuraSeal | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Termination Type Crimp | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed