TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 AWG
- RS庫存編號:
- 533-673
- 製造零件編號:
- DS-18-22-RS
- 製造商:
- TE Connectivity
可享批量折扣
查看批量定價選項小計（1 包，共 50 件）*
TWD985.00
(不含稅)
TWD1,034.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 3,350 件準備從其他地點送貨
- 加上 16,300 件從 2026年9月03日 起發貨
- 加上 600 件從 2026年9月03日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 50 - 450 | TWD19.70 | TWD985.00 |
| 500 - 1200 | TWD19.20 | TWD960.00 |
| 1250 - 4950 | TWD18.80 | TWD940.00 |
| 5000 - 7450 | TWD18.40 | TWD920.00 |
| 7500 + | TWD17.90 | TWD895.00 |
* 參考價格
- RS庫存編號:
- 533-673
- 製造零件編號:
- DS-18-22-RS
- 製造商:
- TE Connectivity
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Splice Connector | |
| Overall Length | 36mm | |
| Diameter | 3.7mm | |
| Minimum Wire Size AWG | 18AWG | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 22AWG | |
| Colour | Red | |
| Insulation Material | Nylon | |
| Series | DuraSeal | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 TE Connectivity | ||
Splice Type Butt | ||
Product Type Splice Connector | ||
Overall Length 36mm | ||
Diameter 3.7mm | ||
Minimum Wire Size AWG 18AWG | ||
Insulation Insulated | ||
Maximum Wire Size AWG 22AWG | ||
Colour Red | ||
Insulation Material Nylon | ||
Series DuraSeal | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- MX
Red 22 → 18 AWG
Features and Benefits:
Colour is red - colour coded for easy identification of gauge sizes
Maximum wire size 1.5mm Dia.
0.5 to 1.0mm² CSA
Resistance to moisture and abrasion
Strain relief
Protection from wire pull out
Easy to install
Materials:
Insulative sleeve - polyamide with thermoplastic adhesive coating inside
Crimp splice – Tin plated copper alloy
Base metal – Copper
Applications:
These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:
Automotive
Commercial wiring
Marine electronics
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed