SICK I150 Rope Pull Switch 203 mm, 2 NC
- RS庫存編號:
- 285-1830
- 製造零件編號:
- I150-RP224 / 1064511
- 製造商:
- SICK
小計（1 件）*
TWD11,106.00
(不含稅)
TWD11,661.30
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD11,106.00 |
* 參考價格
- RS庫存編號:
- 285-1830
- 製造零件編號:
- I150-RP224 / 1064511
- 製造商:
- SICK
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SICK | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NC | |
| IP Rating | IP65 | |
| Series | I150 | |
| Contact Current | 2A | |
| Minimum Operating Temperature | -25°C | |
| Contact DC Voltage | 5V dc | |
| Maximum Operating Temperature | 80°C | |
| Housing Material | Metal | |
| Standards/Approvals | China RoHS, cULus, EU DoC, IEC, UKCA | |
| Width | 69mm | |
| Length | 203mm | |
| Depth | 85mm | |
| Hazardous Area Certification | No | |
| Mechanical Life | 106Cycles | |
| 選取全部 | ||
|---|---|---|
品牌 SICK | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NC | ||
IP Rating IP65 | ||
Series I150 | ||
Contact Current 2A | ||
Minimum Operating Temperature -25°C | ||
Contact DC Voltage 5V dc | ||
Maximum Operating Temperature 80°C | ||
Housing Material Metal | ||
Standards/Approvals China RoHS, cULus, EU DoC, IEC, UKCA | ||
Width 69mm | ||
Length 203mm | ||
Depth 85mm | ||
Hazardous Area Certification No | ||
Mechanical Life 106Cycles | ||
- COO (Country of Origin):
- DO
SICK I150 Series Rope Pull Switch, 203mm Length, Metal Housing - I150-RP224 / 1064511
This rope pull switch provides a manually operated safety cut-off for industrial lines and conveyor systems, designed for single-direction actuation and remote rope routing up to 75m. It features positive-action normally-closed contacts and a slow-action switching element suited to low-voltage safety circuits. The unit is housed in varnished die-cast lightweight metal and rated for protected use in dust- and water-prone environments.
Features and Benefits:
• 2NC contacts providing positive-action safety switching
• 2A current rating enabling low-voltage control circuits
• IP65 enclosure protecting against dust and water ingress
• Mechanical life 1e6 cycles supporting extended service intervals
• Operating range -25 to 80°C allowing wide ambient deployment
• 2A current rating enabling low-voltage control circuits
• IP65 enclosure protecting against dust and water ingress
• Mechanical life 1e6 cycles supporting extended service intervals
• Operating range -25 to 80°C allowing wide ambient deployment
Applications
• Suitable for conveyor emergency-stop rope installations
• Ideal for long-run rope systems up to 75m
• Used with safety logic units requiring slow-action switching
• Can be used at sites requiring cULus and UKCA certification
• Used for safeguarding accessways in manufacturing plants
• Ideal for long-run rope systems up to 75m
• Used with safety logic units requiring slow-action switching
• Can be used at sites requiring cULus and UKCA certification
• Used for safeguarding accessways in manufacturing plants
How is fault detection handled in this device?
It contains no internal fault detection, so connected safety logic must monitor faults.
What electrical connection does it use?
It connects via an M12 4-pin plug connector with a nickel-plated brass coupling nut.
What are the switching voltage and minimum switching current?
The switching threshold is ≥5V DC and the switching current specified is 5mA at 5V DC.
What short-circuit protection is required?
Short-circuit protection rated at 2A is specified for the switching circuit.
What mechanical actuation characteristics affect installation?
Actuation force is 125N at 300mm deflection and actuation frequency is ≤3,600 operations per hour.