Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS庫存編號:
- 130-0875
- 製造零件編號:
- XY2CEDA196H7
- 製造商:
- Telemecanique Sensors
暫時無法供應
抱歉，我們不知道何時會到貨。
- RS庫存編號:
- 130-0875
- 製造零件編號:
- XY2CEDA196H7
- 製造商:
- Telemecanique Sensors
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Contact AC Voltage | 130V ac | |
| E-Stop Button | Yes | |
| Contact Current | 3A | |
| Contact DC Voltage | 130V dc | |
| Maximum Operating Temperature | 70°C | |
| Length | 285mm | |
| Housing Material | Stainless Steel | |
| Width | 106mm | |
| Standards/Approvals | CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | |
| Depth | 142mm | |
| Hazardous Area Certification | ATEX | |
| Conduit Entry | 1/2 in NPT | |
| Mechanical Life | 60000Cycles | |
| 選取全部 | ||
|---|---|---|
品牌 Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Contact AC Voltage 130V ac | ||
E-Stop Button Yes | ||
Contact Current 3A | ||
Contact DC Voltage 130V dc | ||
Maximum Operating Temperature 70°C | ||
Length 285mm | ||
Housing Material Stainless Steel | ||
Width 106mm | ||
Standards/Approvals CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | ||
Depth 142mm | ||
Hazardous Area Certification ATEX | ||
Conduit Entry 1/2 in NPT | ||
Mechanical Life 60000Cycles | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
相關連結
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2 NO/2 NC
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- Telemecanique Sensors XY2 Rope Pull Switch 229 mm 2 NO/2 NC