小計（1 件）*
TWD3,331.00
(不含稅)
TWD3,497.55
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 1 件從 2026年3月31日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,331.00 |
* 參考價格
- RS庫存編號:
- 190-8344
- 製造零件編號:
- 22211-E1-XL
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55 mm | |
| Race Width | 25mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| End Type | Open | |
| Dynamic Load Rating | 129kN | |
| Outside Diameter | 100 mm | |
| Standards/Approvals | No | |
| Static Load Rating | 130kN | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 55 mm | ||
Race Width 25mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
End Type Open | ||
Dynamic Load Rating 129kN | ||
Outside Diameter 100 mm | ||
Standards/Approvals No | ||
Static Load Rating 130kN | ||
Bearing arrangements are subjected to high and very high radial loads
Relatively high axial loads occur on one or both sides, in addition to high radial forces
Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
High shock type loads must be supported dynamically
Locating bearings with a very high load carrying capacity are required
相關連結
- FAG 22211-E1-XL-C3 Parallel 55 mm ID Roller Bearing, 100 mm OD
- FAG 22211-E1-XL-K Tapered 55 mm ID Roller Bearing, 100 mm OD
- FAG 22211-E1-XL-K-C3 Tapered 55 mm ID Roller Bearing, 100 mm OD
- FAG 22311-E1-XL Parallel 55 mm ID Roller Bearing, 120 mm OD
- FAG 22310-E1-XL Parallel 50 mm ID Roller Bearing, 110 mm OD
- FAG 22212-E1-XL Parallel 60 mm ID Roller Bearing, 110 mm OD
- FAG 22316-E1-XL Parallel 80 mm ID Roller Bearing, 170 mm OD
- FAG 22215-E1-XL Parallel 75 mm ID Roller Bearing, 130 mm OD