小計（1 件）*
TWD4,076.00
(不含稅)
TWD4,279.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 5 件從 2026年1月05日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD4,076.00 |
* 參考價格
- RS庫存編號:
- 190-8346
- 製造零件編號:
- 22212-E1-XL
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60 mm | |
| Race Width | 28mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Standards/Approvals | No | |
| End Type | Open | |
| Outside Diameter | 110 mm | |
| Dynamic Load Rating | 160kN | |
| Static Load Rating | 155kN | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 60 mm | ||
Race Width 28mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Standards/Approvals No | ||
End Type Open | ||
Outside Diameter 110 mm | ||
Dynamic Load Rating 160kN | ||
Static Load Rating 155kN | ||
Bearing arrangements are subjected to high and very high radial loads
Relatively high axial loads occur on one or both sides, in addition to high radial forces
Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
High shock type loads must be supported dynamically
Locating bearings with a very high load carrying capacity are required
相關連結
- FAG 22212-E1-XL-C3 Parallel 60 mm ID Roller Bearing, 110 mm OD
- FAG 22212-E1-XL-K Tapered 60 mm ID Roller Bearing, 110 mm OD
- FAG 22212-E1-XL-K-C3 Tapered 60 mm ID Roller Bearing, 110 mm OD
- FAG WS22212-E1-XL-2RSR Parallel 60 mm ID Roller Bearing, 110 mm OD
- FAG 21310-E1-XL Parallel 50 mm ID Roller Bearing, 110 mm OD
- FAG 22310-E1-XL Parallel 50 mm ID Roller Bearing, 110 mm OD
- FAG 22310-E1-XL-C3 Parallel 50 mm ID Roller Bearing, 110 mm OD
- FAG 22212-E1A-XL-M-C3 Cylindrical 60 mm ID Roller Bearing, 110 mm OD