INA HK1516-2RS-L271 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD
- RS庫存編號:
- 137-1740
- 製造零件編號:
- HK1516-2RS-L271
- 製造商:
- INA
可享批量折扣
小計（1 件）*
TWD306.00
(不含稅)
TWD321.30
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 9 件從 2026年5月12日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD306.00 |
| 13 - 24 | TWD292.00 |
| 25 + | TWD289.00 |
* 參考價格
- RS庫存編號:
- 137-1740
- 製造零件編號:
- HK1516-2RS-L271
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 15mm | |
| Race Width | 16mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Static Load Rating | 9800N | |
| Number of Rows | 1 | |
| Dynamic Load Rating | 7800N | |
| Outside Diameter | 21mm | |
| End Type | Sealed | |
| Limiting Speed | 9900rpm | |
| Maximum Speed - Grease | 9900rpm | |
| Standards/Approvals | No | |
| Bearing Type | Drawn Cup Needle | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 15mm | ||
Race Width 16mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Static Load Rating 9800N | ||
Number of Rows 1 | ||
Dynamic Load Rating 7800N | ||
Outside Diameter 21mm | ||
End Type Sealed | ||
Limiting Speed 9900rpm | ||
Maximum Speed - Grease 9900rpm | ||
Standards/Approvals No | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
相關連結
- INA HK1520-2RS-L271 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD
- INA HK1516-B 15 mm ID Roller Bearing Drawn Cup Needle, 21 mm OD
- INA HK2020-2RS-L271 20 mm ID Roller Bearing Drawn Cup Needle, 26 mm OD
- INA HK1216-2RS-L271 12 mm ID Roller Bearing Drawn Cup Needle, 18 mm OD
- INA HK3520-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD
- INA HK1616-2RS-L271 16 mm ID Roller Bearing Drawn Cup Needle, 22 mm OD
- INA HK1416-2RS-L271 14 mm ID Roller Bearing Drawn Cup Needle, 20 mm OD
- INA HK2530-2RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD