INA HK3516-2RS-L271 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD

可享批量折扣

小計（1 件）*

TWD687.00

(不含稅)

TWD721.35

(含稅)

庫存資訊目前無法存取 - 請稍後再回來查看

* 參考價格

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

	選取全部
	品牌 INA
	Product Type Roller Bearing
	Inside Diameter 35mm
	Race Width 16mm
	Bore Type Parallel
	Cage Material Steel
	Dynamic Load Rating 13.1kN
	Static Load Rating 21.3kN
	Standards/Approvals No
	End Type Sealed
	Outside Diameter 42mm
	Bearing Type Drawn Cup Needle

Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height

Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies

Can support high radial loads (are pure radial bearings)

Require a considerably smaller radial design envelope than machined needle roller bearings

Usually run directly on the shaft (no inner ring)

Permit relatively high speeds

Are easy to mount

Require no additional means of axial retention (as a result of which the housing bore is easy to produce)

Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)

Result in particularly compact, cost-effective and economical bearing arrangements

相關連結