INA HK2820-2RS-L271 28 mm ID Roller Bearing Drawn Cup Needle, 35 mm OD

可享批量折扣

小計（1 件）*

TWD413.00

(不含稅)

TWD433.65

(含稅)

有庫存

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

* 參考價格

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

	選取全部
	品牌 INA
	Product Type Roller Bearing
	Inside Diameter 28mm
	Race Width 20mm
	Bore Type Parallel
	Cage Material Steel
	End Type Sealed
	Standards/Approvals No
	Dynamic Load Rating 16.4kN
	Static Load Rating 26.5kN
	Outside Diameter 35mm
	Bearing Type Drawn Cup Needle

Are particularly suitable for Applications with a very small radial section height on account of their very low cross-sectional height

Are used if the housing bore is not suitable as a raceway for needle roller and cage assemblies

Can support high radial loads (are pure radial bearings)

Require a considerably smaller radial design envelope than machined needle roller bearings

Usually run directly on the shaft (no inner ring)

Permit relatively high speeds

Are easy to mount

Require no additional means of axial retention (as a result of which the housing bore is easy to produce)

Can be readily used to close off the shaft ends of bearing positions (drawn cup needle roller bearings with closed end)

Result in particularly compact, cost-effective and economical bearing arrangements

相關連結