Parker Pneumatic Timer 8 bar max

RS庫存編號:: 410-488
製造零件編號:: PRT-C10
製造商:: Parker

小計（1 件）*

TWD9,605.00

(不含稅)

TWD10,085.25

訂單超過 $1,300.00 免費送貨

有庫存

加上 45 件從 2026年4月27日起發貨
加上 5 件從 2026年7月24日起發貨
加上 16 件從 2026年8月14日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD9,605.00

* 參考價格

RS庫存編號:: 410-488
製造零件編號:: PRT-C10
製造商:: Parker

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Parker
	Product Type	Pneumatic Timer
	Hazardous Area Certification	EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X
	Mount Type	Surface, Flush, DIN Rail, Clip
	Minimum Operating Pressure	3bar
	Maximum Operating Pressure	8 bar
	Minimum Operating Temperature	-15°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982)

	選取全部
	品牌 Parker
	Product Type Pneumatic Timer
	Hazardous Area Certification EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X
	Mount Type Surface, Flush, DIN Rail, Clip
	Minimum Operating Pressure 3bar
	Maximum Operating Pressure 8 bar
	Minimum Operating Temperature -15°C
	Maximum Operating Temperature 60°C
	Standards/Approvals EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982)

Parker Pneumatic Timer

The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This OFF delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.

Note:

All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.

Features and Benefits

Long life expectancy

Polyamide body material

2 or 3-Port Subbase mount

Response time is 2 millisecond to 3 millisecond

Operating temperature ranging between -15°C and 60°C

Very reliable

Certifications

ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Parker Pneumatic Timer 8 bar max

訂單超過 $1,300.00 免費送貨

Parker Pneumatic Timer

Features and Benefits

Certifications

相關連結