小計（1 件）*
TWD7,931.00
(不含稅)
TWD8,327.55
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 9 件從 2026年5月04日 起發貨
- 加上 2 件從 2026年5月05日 起發貨
- 加上 5 件從 2026年9月02日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD7,931.00 |
* 參考價格
- RS庫存編號:
- 410-498
- 製造零件編號:
- PRT-E10
- 製造商:
- Parker
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | No | |
| Minimum Operating Pressure | 3bar | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification No | ||
Minimum Operating Pressure 3bar | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Parker Pneumatic Timer
The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This ON delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.
Features and Benefits
Long life expectancy
Polyamide body material
2 or 3-Port Subbase mount
Response time is 2 millisecond to 3 millisecond
Operating temperature ranging between -15°C and 60°C
Very reliable
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
相關連結
- Parker Pneumatic Timer 8 bar max
- Crouzet Pneumatic Timer Timer Relay 8 bar max
- Crouzet Pneumatic Timer 8 bar max
- Norgren Pneumatic Timer 10 bar max
- Festo Pneumatic Timer 6 bar max
- Parker 3/8 in Pneumatic Air Lubricator 17 bar, P32 Series
- Parker PLN series 8 bar Pneumatic Logic Controller with NOT function
- Parker PLL series 8 bar Pneumatic Logic Controller with AND function