Parker Pneumatic Timer 8 bar max
- RS庫存編號:
- 410-460
- 製造零件編號:
- PRT-F10
- 製造商:
- Parker
小計（1 件）*
TWD10,615.00
(不含稅)
TWD11,145.75
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 4 件準備從其他地點送貨
- 加上 3 件從 2027年3月19日 起發貨
- 加上 5 件從 2027年4月09日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD10,615.00 |
* 參考價格
- RS庫存編號:
- 410-460
- 製造零件編號:
- PRT-F10
- 製造商:
- Parker
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | Conforming to certificate LCIE 866115X, EExe ll T4 | |
| Series | PRT | |
| Minimum Operating Pressure | 3bar | |
| Mount Type | DIN Rail | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | |
| 選取全部 | ||
|---|---|---|
品牌 Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification Conforming to certificate LCIE 866115X, EExe ll T4 | ||
Series PRT | ||
Minimum Operating Pressure 3bar | ||
Mount Type DIN Rail | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | ||
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Very Reliable
Long Life Expectancy
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Note
All logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing o-rings are in the bottom of each unit.
相關連結
- Parker Pneumatic Timer 8 bar max
- Crouzet Pneumatic Timer Timer Relay 8 bar max
- Crouzet Pneumatic Timer 8 bar max
- Parker PRT series 8 bar Pneumatic Logic Controller with Timers function
- Parker PRT series 8 bar Pneumatic Logic Controller
- Norgren Pneumatic Timer 10 bar max
- Festo Pneumatic Timer 6 bar max
- Parker PSE series 8 bar Pneumatic Logic Controller