B&R X20 Series Pluggable Terminal Block, 16-Contact, 4.2 mm Pitch, 2 Row, X20TB1F

The B&R Industrial Automation GmbH terminal block enables tool-free wiring with push-in technology, allowing quick and secure connections. Wire release is simple using a screwdriver, and each terminal can be labelled for clear identification. It uses push-in terminals with a typical push-in force of 10 N and supports only copper wires (aluminum wires are not permitted). The required wire stripping length is between 7 to 9 mm. It supports the following connection cross-sections: single-wire (0.08 to 1.50 mm² / 28 to 16 AWG), fine-stranded wires (0.25 to 1.50 mm² / 24 to 16 AWG), and wires with end sleeves (0.25 to 0.75 mm² / 24 to 20 AWG).

Plain text labelling also possible

The PH Series from JST are a range of thin, highly reliable, single row housing for use with PH series crimp contacts. They have been designed to meet the demand for high-density connection of internal wires to printed circuit boards.

• 2.0 mm pitch