PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 4-Channel

RS庫存編號:: 846-3428
Distrelec 貨號:: 300-18-075
製造零件編號:: PicoScope 3406D
製造商:: Pico Technology

PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 4-Channel

查看所有Oscilloscopes

暫時無法供應

我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。

RS庫存編號:: 846-3428
Distrelec 貨號:: 300-18-075
製造零件編號:: PicoScope 3406D
製造商:: Pico Technology

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	200MHz
	Number of Channels	4
	Model Number	PicoScope 3406D
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 3000
	Width	170mm
	Length	190mm
	Height	40mm
	Standards/Approvals	RoHS, WEEE
	Maximum Vertical Sensitivity	4V/div
	Rise Time	1.75ns
	Maximum Time Base	5000s/div
	Minimum Vertical Sensitivity	4mV/div
	Vertical Resolution	8 bit
	Power Source	USB
	Minimum Time Base	500ps/div

	選取全部
	品牌 Pico Technology
	Product Type Oscilloscope
	Bandwidth 200MHz
	Number of Channels 4
	Model Number PicoScope 3406D
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 3000
	Width 170mm
	Length 190mm
	Height 40mm
	Standards/Approvals RoHS, WEEE
	Maximum Vertical Sensitivity 4V/div
	Rise Time 1.75ns
	Maximum Time Base 5000s/div
	Minimum Vertical Sensitivity 4mV/div
	Vertical Resolution 8 bit
	Power Source USB
	Minimum Time Base 500ps/div

COO (Country of Origin):: GB

PicoScope 3000 Series Oscilloscope, 200MHz Bandwidth, 4 Channels - PicoScope 3406D

This oscilloscope is a PC‑based diagnostic instrument designed for waveform capture and analysis via a USB connection. It is powered from the USB port and interfaces with multiple serial buses, enabling signal measurement and protocol decoding in laboratory and field environments. The unit provides a balance of timebase and vertical control suitable for transient and steady‑state signal inspection without autonomous display hardware.

Features and Benefits:

• 200MHz bandwidth for capturing high‑frequency signals
• 4‑channel input for simultaneous multi‑signal observation
• 500ps/div minimum timebase for fine temporal resolution
• 8‑bit vertical resolution for consistent amplitude quantisation
• 1.75ns rise time to resolve fast signal edges

Applications

• Suitable for automotive bus diagnostics including CAN and LIN
• Ideal for embedded systems debugging with I2C and SPI
• Used for serial communications analysis of RS232 and UART
• Can be used for laboratory signal characterisation via USB
• Used with PC software for portable field measurements

What power source is required for operation?

It is powered directly from the host USB port, so no external supply is needed.

Which serial protocols can it Interface with?

It supports CAN, I2C, LIN, RS232, SPI and UART connections for protocol‑level inspection.

What is the maximum selectable timebase range?

The timebase spans down to 500ps/div and up to 5000s/div to cover fast transients and long‑duration signals.

How Compact is the unit for transport?

The instrument measures 40 mm high, 170 mm wide and 190 mm long, facilitating portable use.