PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 18-Channel

RS庫存編號:: 818-2879
Distrelec 貨號:: 300-08-271
製造零件編號:: PicoScope 3206D MSO
製造商:: Pico Technology

PicoScope 3000 Series, 200 MHz PC Based Oscilloscope 18-Channel

查看所有Oscilloscopes

暫時無法供應

我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。

RS庫存編號:: 818-2879
Distrelec 貨號:: 300-08-271
製造零件編號:: PicoScope 3206D MSO
製造商:: Pico Technology

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Pico Technology
	Product Type	Oscilloscope
	Bandwidth	200MHz
	Number of Channels	18
	Model Number	PicoScope 3206D MSO
	Oscilloscope Type	PC Based
	Interface Type	CAN, IIC, LIN, RS232, SPI, UART, USB
	Series	PicoScope 3000
	Height	40mm
	Width	170mm
	Standards/Approvals	RoHS, WEEE
	Length	190mm
	Maximum Time Base	5000s/div
	Minimum Time Base	500ps/div
	Minimum Vertical Sensitivity	4mV/div
	Rise Time	1.75ns
	Maximum Vertical Sensitivity	4V/div
	Power Source	USB
	Vertical Resolution	8 bit

	選取全部
	品牌 Pico Technology
	Product Type Oscilloscope
	Bandwidth 200MHz
	Number of Channels 18
	Model Number PicoScope 3206D MSO
	Oscilloscope Type PC Based
	Interface Type CAN, IIC, LIN, RS232, SPI, UART, USB
	Series PicoScope 3000
	Height 40mm
	Width 170mm
	Standards/Approvals RoHS, WEEE
	Length 190mm
	Maximum Time Base 5000s/div
	Minimum Time Base 500ps/div
	Minimum Vertical Sensitivity 4mV/div
	Rise Time 1.75ns
	Maximum Vertical Sensitivity 4V/div
	Power Source USB
	Vertical Resolution 8 bit

COO (Country of Origin):: GB

PicoScope 3000 Series Oscilloscope, 200MHz Bandwidth, 500ps/div Time Base - PicoScope 3206D MSO

This oscilloscope is a PC-connected diagnostic instrument designed for signal visualisation and mixed-signal analysis in development and test environments. It operates from a USB supply and links to host software to display analogue and digital signals, accommodating a broad range of serial bus interfaces for system-level debugging.

Features and Benefits:

• 200MHz bandwidth delivers clear frequency-domain observation
• 500ps/div minimum time base captures fast transient events
• 1.75ns rise time enables accurate edge characterisation
• 8-bit vertical resolution supports consistent amplitude sampling
• 4mV/div minimum sensitivity reveals low-amplitude signals

Applications

• Suitable for automotive network bus debugging with CAN and LIN
• Ideal for embedded systems analysis using I2C and SPI
• Used with serial peripherals employing UART and RS232
• Can be used for mixed-signal verification across 18 channels
• Used for portable PC-based measurement where USB power is required

How many channels are available for mixed-signal capture?

It provides an 18-channel mixed-signal configuration allowing concurrent analogue and digital waveform acquisition.

Which physical interfaces can I expect to probe for protocol analysis?

The unit supports CAN, I2C, LIN, RS232, SPI and UART interfaces for direct protocol-level inspection.

What are the unit’s physical and supply characteristics?

The instrument measures 190 mm in length, 170 mm in width and 40 mm in height, and it is powered via USB.

How does its dynamic range aid signal measurement?

With an 8-bit vertical resolution and a minimum sensitivity of 4 mV/div the instrument resolves small amplitude variations while maintaining broad amplitude coverage.