Fluke 114 Handheld Digital Multimeter True RMS

RS庫存編號:: 616-1498
Distrelec 貨號:: 176-05-413
製造零件編號:: FLUKE-114 EUR
製造商:: Fluke

Fluke 114 Handheld Digital Multimeter True RMS

小計（1 件）*

TWD8,143.00

(不含稅)

TWD8,550.15

訂單超過 $1,300.00 免費送貨

有庫存

42 件準備從其他地點送貨
加上 52 件從 2026年4月23日起發貨
加上 2 件從 2026年5月29日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD8,143.00

* 參考價格

RS庫存編號:: 616-1498
Distrelec 貨號:: 176-05-413
製造零件編號:: FLUKE-114 EUR
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Multimeter
	Multimeter Type	Handheld
	Display Type	Digital
	Resistance Resolution	100mΩ
	Model Number	114
	Functions Measured	AC Voltage, Continuity, DC Voltage, Resistance
	Maximum Resistance Measurement	40mΩ
	Maximum DC Voltage Measurement	600V dc
	True RMS	Yes
	DC Voltage Accuracy	±0.5 % rdg + 2 Digits
	AC Voltage Accuracy	±1 % rdg + 3 Digits
	DC Voltage Resolution	0.1 mV dc
	AC Voltage Resolution	0.1mV ac
	Maximum Frequency	1kHz
	Resistance Measurement Accuracy	±1.5 % rdg + 2 Digits
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	50°C
	Battery Life	400h
	Weight	550g
	Standards/Approvals	No
	Height	167mm
	Width	84mm
	Length	46mm
	Safety Category Level	CAT III
	Safety Category Voltage	600V

	選取全部
	品牌 Fluke
	Product Type Multimeter
	Multimeter Type Handheld
	Display Type Digital
	Resistance Resolution 100mΩ
	Model Number 114
	Functions Measured AC Voltage, Continuity, DC Voltage, Resistance
	Maximum Resistance Measurement 40mΩ
	Maximum DC Voltage Measurement 600V dc
	True RMS Yes
	DC Voltage Accuracy ±0.5 % rdg + 2 Digits
	AC Voltage Accuracy ±1 % rdg + 3 Digits
	DC Voltage Resolution 0.1 mV dc
	AC Voltage Resolution 0.1mV ac
	Maximum Frequency 1kHz
	Resistance Measurement Accuracy ±1.5 % rdg + 2 Digits
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 50°C
	Battery Life 400h
	Weight 550g
	Standards/Approvals No
	Height 167mm
	Width 84mm
	Length 46mm
	Safety Category Level CAT III
	Safety Category Voltage 600V

豁免

Fluke Multimeter, ±1 % rdg + 3 Digits AC Voltage Accuracy, ±0.5 % rdg + 2 Digits DC Voltage Accuracy - FLUKE-114 EUR

This handheld multimeter provides compact, field-ready measurement for electrical troubleshooting in industrial environments. It performs AC and DC voltage checks, resistance and continuity testing, and captures minimum, maximum and average values to monitor signal variation. The instrument includes low-impedance input to suppress ghost voltages and a backlit display for low-light locations.

Features & Benefits

• True RMS measurement for accurate AC readings up to 1 kHz
• DC accuracy ±0.5%rdg+2 digits for precise voltage checks
• Resistance range down to 40 mΩ to detect low-resistance faults
• Auto selection of AC/DC volts to speed diagnostics
• Min/Max/Average logging to capture transient fluctuations
• 9V alkaline battery delivering 400 h typical runtime

Applications

• Suitable for commissioning and fault finding on control panels
• Ideal for maintenance of motors and inverters with variable-frequency drives
• Used for insulation and bonding checks in installation verification
• Can be used for routine site verification of distribution boards
• Used with portable test setups needing ghost-voltage suppression

What display and update behaviour can I expect during measurements?

The meter uses a 6,000-count digital readout with a 33-segment bar graph

numeric updates occur four times per second and the bar graph updates 32 times per second.

How does the device protect against high-energy transients?

It has surge protection rated to withstand 6 kV Peak per the applicable IEC safety parameters for CAT III, 600V environments.

What environmental limits apply for safe operation and storage?

Operating temperature range is -10°C to +50°C and storage range is -40°C to +60°C with specified accuracy maintained between 18°C and 28°C.

What accessories are supplied to start working immediately?

The kit includes insulated test leads, a protective holster and a pre-installed 9V alkaline battery.

Note

For Calibrated Articles - Please note that accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.