Fluke 175 Digital Digital Multimeter True RMS

此圖片僅供參考,請參閲產品詳細資訊及規格

小計(1 件)*

TWD23,069.00

(不含稅)

TWD24,222.45

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 139 件準備從其他地點送貨
  • 加上 6 件從 2026年6月17日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD23,069.00

* 參考價格

RS庫存編號:
394-4470
Distrelec 貨號:
176-05-827
製造零件編號:
FLUKE 175
製造商:
Fluke
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Fluke

Product Type

Multimeter

Multimeter Type

Digital

Resistance Resolution

100mΩ

Display Type

Digital

Model Number

175

Functions Measured

AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance

Maximum DC Voltage Measurement

1kV dc

Maximum Resistance Measurement

50mΩ

True RMS

Yes

DC Voltage Accuracy

±0.15 % rdg + 2 Digits

AC Voltage Accuracy

±1 % rdg + 3 Digits

DC Current Accuracy

±1 % rdg + 3 Digits

AC Current Accuracy

±1.5 % rdg + 3 Digits

DC Voltage Resolution

0.1 mV dc

AC Current Resolution

0.01mA ac

AC Voltage Resolution

0.1mV ac

DC Current Resolution

0.01mA dc

Maximum Frequency

1kHz

Minimum Operating Temperature

-10°C

Resistance Measurement Accuracy

±1.5 % rdg + 3 Digits

Maximum Operating Temperature

50°C

Battery Life

200h

Width

90mm

Weight

420g

Standards/Approvals

No

Height

43mm

Length

185mm

Safety Category Level

CAT III, CAT IV

Safety Category Voltage

1000V

Battery Type

Alkaline

豁免

COO (Country of Origin):
US

Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175


This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.

Features & Benefits


• True-RMS measurement gives accurate readings on non-sinusoidal signals
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use

**Applications**


• Suitable for commissioning and fault-finding on motor drives
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages

What probes and accessories are supplied for general use?


Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed

temperature measurements use the included bead thermocouple probe.

How does the instrument behave with rapidly changing signals?


An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.

How does it alert when encountering potentially hazardous voltages?


A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.

What recording and hold functions assist data capture during inspections?


The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.

How is battery and fuse maintenance performed on site?


The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.

Supplied with

Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide

相關連結