Fluke 1663 Multifunction Tester 1000V Earth Resistance Measurement With USB
- RS庫存編號:
- 117-6676
- Distrelec 貨號:
- 300-60-459
- 製造零件編號:
- FLK-1663 ITDK
- 製造商:
- Fluke
小計（1 件）*
TWD77,967.00
(不含稅)
TWD81,865.35
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 6 件準備從其他地點送貨
- 加上 5 件從 2026年4月27日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD77,967.00 |
* 參考價格
- RS庫存編號:
- 117-6676
- Distrelec 貨號:
- 300-60-459
- 製造零件編號:
- FLK-1663 ITDK
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Loop Impedance Test Type | Phase to Neutral, Phase to Earth | |
| Product Type | Multifunction Tester | |
| Automatic RCD Test | Yes | |
| Model Number | 1663 | |
| RCD Ramp Test | Yes | |
| Insulation Test Voltage | 1000V | |
| Maximum Voltage Measurement | 500V ac/dc | |
| Test Type | Phase Sequence Test, Insulation Resistance, Frequency, MOSFET, Resistance, Voltage, RCD Test, Miniature GPS, Continuity, Wiring Polarity | |
| Earth Resistance Measurement | Yes | |
| Downloadable Data | Yes | |
| Interface Type | USB | |
| Continuity Test Current | 10mA | |
| RCD Test Type | Type G, Type S, AC | |
| Length | 100mm | |
| Weight | 1.3kg | |
| Standards/Approvals | ANSI/ISA -s82.02.01, UL61010, CAN/CSA c22.2 No. 1010, IEC/EN610101 | |
| Width | 250mm | |
| Height | 125mm | |
| Remote Switch Mode | Yes | |
| IP Rating | IP40 | |
| Test Standards | EN61557-1 to IEC, EN 61557-7, EN 61557-10, EC, IEC | |
| Display Type | LCD | |
| Safety Category Level | CAT III, CAT IV | |
| Power Source | Battery | |
| Safety Category Voltage | 500V | |
| Battery Type | AA | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Loop Impedance Test Type Phase to Neutral, Phase to Earth | ||
Product Type Multifunction Tester | ||
Automatic RCD Test Yes | ||
Model Number 1663 | ||
RCD Ramp Test Yes | ||
Insulation Test Voltage 1000V | ||
Maximum Voltage Measurement 500V ac/dc | ||
Test Type Phase Sequence Test, Insulation Resistance, Frequency, MOSFET, Resistance, Voltage, RCD Test, Miniature GPS, Continuity, Wiring Polarity | ||
Earth Resistance Measurement Yes | ||
Downloadable Data Yes | ||
Interface Type USB | ||
Continuity Test Current 10mA | ||
RCD Test Type Type G, Type S, AC | ||
Length 100mm | ||
Weight 1.3kg | ||
Standards/Approvals ANSI/ISA -s82.02.01, UL61010, CAN/CSA c22.2 No. 1010, IEC/EN610101 | ||
Width 250mm | ||
Height 125mm | ||
Remote Switch Mode Yes | ||
IP Rating IP40 | ||
Test Standards EN61557-1 to IEC, EN 61557-7, EN 61557-10, EC, IEC | ||
Display Type LCD | ||
Safety Category Level CAT III, CAT IV | ||
Power Source Battery | ||
Safety Category Voltage 500V | ||
Battery Type AA | ||
豁免
- COO (Country of Origin):
- GB
Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1663 ITDK
This multifunction tester is a handheld instrument for verification and compliance testing of fixed electrical installations. It combines insulation resistance testing up to 1000 V, voltage and frequency measurement, earth resistance assessment and RCD diagnostics to support inspection, installation and maintenance tasks in industrial and commercial environments.
Features & Benefits
• Insulation test voltages 50–1000V enable varied insulation assessments
• Continuity test current 1 mA permits sensitive low-current winding checks
• Loop impedance tester phase to earth delivers accurate fault loop readings
• RCD ramp test function provides tripping characteristic analysis including 6 mA EV tests
• USB downloadable data tester Fluke capability simplifies result transfer
• Safety rated CAT III 500V and CAT IV 300V for high-voltage site work
• Continuity test current 1 mA permits sensitive low-current winding checks
• Loop impedance tester phase to earth delivers accurate fault loop readings
• RCD ramp test function provides tripping characteristic analysis including 6 mA EV tests
• USB downloadable data tester Fluke capability simplifies result transfer
• Safety rated CAT III 500V and CAT IV 300V for high-voltage site work
Applications
• Suitable for validating EV charging station DC-protection monitors
• Ideal for commissioning protective devices in industrial panels
• Used for routine fixed wiring inspections in commercial buildings
• Can be used for motor winding continuity and maintenance diagnostics
• Used with reporting software to produce client documentation
• Ideal for commissioning protective devices in industrial panels
• Used for routine fixed wiring inspections in commercial buildings
• Can be used for motor winding continuity and maintenance diagnostics
• Used with reporting software to produce client documentation
How does it handle DC-sensitive RCDs used on charging points?
It generates VAR mode test currents for smooth-DC RCDs including 6 mA, 60 mA and 200 mA and performs linear ramp tests to assess trip behaviour per IEC 62955.
What data export options are available for site reporting?
Results can be transferred via USB and imported into TruTest-compatible software for file management and report generation.
What measurements support short-circuit and earth-fault calculations?
The instrument measures loop and line resistance and computes prospective earth-fault current and prospective short-circuit current from measured voltage and resistance.
What RCD characteristics can be measured in one sequence?
It performs automatic RCD test sequences that measure tripping time, tripping current and variable current profiles for Type A, AC and G/S variants.
What power source and protection rating does the instrument use?
It operates from AA batteries and has an IP40 sealing with overvoltage protection categories CAT III 500V and CAT IV 300 V.
Note
Fluke 1663 replaces the existing Fluke 1653.
Standards
IEC 60364
Supplied with
The Fluke 1663 comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.