Fluke 1662 Multifunction Tester, 100 V, 250 V, 500 V, 1000 V

RS庫存編號:: 117-6665
Distrelec 貨號:: 300-60-456
製造零件編號:: FLK-1662 SCH
製造商:: Fluke

Fluke 1662 Multifunction Tester, 100 V, 250 V, 500 V, 1000 V

小計（1 件）*

TWD75,775.00

(不含稅)

TWD79,563.75

訂單超過 $1,300.00 免費送貨

有庫存

2 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD75,775.00

* 參考價格

RS庫存編號:: 117-6665
Distrelec 貨號:: 300-60-456
製造零件編號:: FLK-1662 SCH
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Loop Impedance Test Type	Phase to Earth, Phase to Neutral
	Automatic RCD Test	Yes
	Model Number p	1662
	RCD Ramp Test	Yes
	Insulation Test Voltage	100 V, 250 V, 500 V, 1000 V
	Maximum Voltage Measurement	500V ac/dc
	Test Type	Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity
	Continuity Test Current	10mA
	RCD Test Type	A/F, AC Type, G, S
	Remote Switch Mode	Yes
	Test Standards	IEC 60364
	IP Rating	IP40
	Length	100mm
	Dimensions	100 x 250 x 125mm
	Minimum Continuity Resistance	20Ω
	Height	125mm
	Weight	1.3 (with Battery)kg
	Safety Category Level	CAT III, CAT IV
	Maximum Continuity Resistance	2000Ω
	Safety Category Voltage	300 V, 500 V
	Voltage Measurement Range	100 → 1000V
	Battery Type	AA
	Safety Category	CAT III 500 V, CAT IV 300 V
	Display Type	LCD
	Power Source	Battery
	Width	250mm

	選取全部
	品牌 Fluke
	Loop Impedance Test Type Phase to Earth, Phase to Neutral
	Automatic RCD Test Yes
	Model Number p 1662
	RCD Ramp Test Yes
	Insulation Test Voltage 100 V, 250 V, 500 V, 1000 V
	Maximum Voltage Measurement 500V ac/dc
	Test Type Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity
	Continuity Test Current 10mA
	RCD Test Type A/F, AC Type, G, S
	Remote Switch Mode Yes
	Test Standards IEC 60364
	IP Rating IP40
	Length 100mm
	Dimensions 100 x 250 x 125mm
	Minimum Continuity Resistance 20Ω
	Height 125mm
	Weight 1.3 (with Battery)kg
	Safety Category Level CAT III, CAT IV
	Maximum Continuity Resistance 2000Ω
	Safety Category Voltage 300 V, 500 V
	Voltage Measurement Range 100 → 1000V
	Battery Type AA
	Safety Category CAT III 500 V, CAT IV 300 V
	Display Type LCD
	Power Source Battery
	Width 250mm

Datasheet

豁免

COO (Country of Origin):: GB

Fluke 1662 Multifunction Installation Testers

Fluke 1662 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances.

Fluke 1662 ensures Fluke reliability, simple operation and all the testing power you need for basic installation testing.

Features

RCD tripping current level ramp test
RCD auto test and ramp test
Pulsating dc sensitive RCD tests (G & S-type)
Remote probe
On/Off switchable auto-start for RCD and Looptest
Heavy duty, single input line cord
Computer interface

Note

Fluke 1662 replaces the existing Fluke 1651 and Fluke 1652.

Standards

IEC 60364

Supplied with

The Fluke 1662 comes with 6 x AA (LR6) cell batteries, CI600 hard carrying case, zero adapter, heavy-duty mains cord, test lead set, padded carrying/waist strap, quick reference guide, TP165X remote control probe & lead set (FTP used probes - UK only) and User's manual on CD-ROM.

FLUKE Multifunction Tester, 500V AC Range, 360kΩ Input Impedance - 1660 Series - FLK-1662 SCH

Take power into your own hands with this multifunction tester from FLUKE. It's an essential bit of kit for use during installation and maintenance of fixed wiring, to make sure regulations are met. The unit's suitable for use with high-voltage distribution circuits, thanks to its 500V CAT III and 300V CAT IV ratings. A zero adapter allows you to perform fast and reliable lead and mains compensation tests. Plus, the built-in ON/OFF switchable auto-start boosts accuracy when doing RCD and loop evaluations.

Features & Benefits

• Lightweight component weighs only 1.3kg for easy handling
• IP40 rating indicates protection against tools and wires smaller than 1mm
• LCD for clear readings in all light levels

Applications

• Medical equipment
• Industrial, commercial and domestic installations
• Power plants

Can I safely transport this unit for in-the-field jobs?

Yes, it comes with a hardshell carry case to protect against bumps and vibrations. The instrument also features a waist strap to make your job easier when accessing equipment on ladders or in hard-to-reach spots.

What other accessories are included with this multifunction tester?

It comes with a unique probe and lead for quick and easy testing.